Influence of melt spinning on the cycle stability of La_(0.75-x)Zr_xMg_(0.25)Ni_(3.2)Co_(0.2)Al_(0.1)(x=0~0.2) electrode alloys
Source abstract
Abstract
In order to improve the electrochemical cycle stability of La-Mg-Ni system A2B7-type electrode alloy,La in the alloy was partly substituted by Zr,and the electrode alloys La0.75-xZrxMg0.25Ni3.2Co0.2Al0.1(x=0,0.05,0.1,0.15,0.2) were prepared by melt spinning technology.The structures of the as-cast and spun alloys were analyzed by XRD,SEM and TEM.The electrochemical cycle stability of the alloys was measured.The influences of the melt spinning and substituting La with Zr on the cycle stability of the alloys were investigated in detail.The failure mechanism of the alloy electrodes was investigated.The obtained results indicated that the as-cast and spun alloys have multiphase structure,including two major phases(La,Mg)Ni3 and LaNi5 as well as a residual phase LaNi2.Both the melt spinning and substituting La with Zr significantly improved the electrochemical cycle stability.The fundamental reasons of which cause lose efficacy of the alloy electrodes are that the surface of the alloy electrodes is severely corroded by electrolyte and that the alloy electrodes are pulverized in process of the electrochemical charge-discharge cycle.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen Storage and Materials · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.