Preparation and characterization of Li-doped ZnO piezoelectric thin films
Source abstract
Abstract
It is extremely important to have high resistivity for zinc oxide(ZnO) film used in piezoelectric devices.The piezoelectric ZnO∶Li films possessing preferential c-axis orientation,high resistivity and good stoichiometry were achieved on substrate of Pt/Ti/SiO_2/Si by the sol-gel method.The effects of annealing temperature and dopant concentration on the crystal quality and electrical properties of ZnO films were investigated.X-ray diffraction(XRD) results showed that the c-axis orientation of ZnO films was affected by annealing temperature and dopant concentration.Current-voltage(I-V) measurements indicated that resistivity of ZnO films was observably enhanced by dopant of Li~+.The resistivity was about 10~9Ω·cm when ZnO film with Li/Zn molar ration of 0.10 was annealed at 600℃.X-ray photoelectron spectroscopy(XPS) study suggested that the binding energy of O1s and ZnL_3M_(45)M_(45) had been affected by the introduction of Li~+,as well as Zn/O ratio.Stoichiometry of the ZnO film with Li-doped was better than that one of the undoped films.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.