article·2011-01-01Open access

The preparation and the high-temperature properties of 3D C_f/SiC composite material by PIP process

Luo Jing-hua

Open full text

Abstract

Cf/SiC composite material is one of the most promising candidates to substitute superalloy,which has been used in current aeronautic engine components working under high-temperature for decades.Towards the requirements of these high temperature components,we successfully prepared 3D Cf/SiC composite material via PIP process with a low density of 1.83g/cm3.Subsequently,mechanical tests of this material including flexural properties and tensile creep were carried out at a typical engine working temperature of 1200℃.In the test of flexural properties,a flexural strength(σ1200b) of 712MPa was obtained,which is higher than the value of the same material measured at room temperature(σRTb=641MPa).This may be due to the deforming of carbon fiber occurred during the cooling process of the material.Furthermore,according to the obtained creep curve at 1200℃ and the constant stress of 120MPa,a creep rate of 2.08×10-3%/h was calculated,which agrees well with the creep rate of 3D Cf/SiC composite material prepared by CVI process measured under the similar conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.