Electrode of chilli-peroxidase of response to phenol
Source abstract
Abstract
A novel peroxidase electrode for the determination of phenol was fabricated by chill-peroxidase(CH-POD) extracted from chill.Carbon nanotubes(CNTs),microcrystalline cellulose(MC),N,N-dimethylformmide(DMF),and CH-POD were modified on the surface of the platinum(Pt).The profile of the peroxidase electrode,its the optimal condition of responsible to phenol and the stability were observed by optical microscope and cyclic voltammetry(CV),respectively.Experimental results indicated that the electrode exhibited a good response to phenol.The optimal conditions of response were as following: 100μL chilli-peroxidase was used in 12mL reaction solution and pH was 7.0.With the scanning speed of 50mV/s the relationship between electric current and concentration of phenol can be described as: I(mA)=0.1429+ 0.01297C.The linear response range was 2-20mmol/L with correlation coefficient of 0.996,detection limit was 0.25mmol/L.The experiment for the stability of the made electrode confirmed that the changing degree for the response signal was below 5% of the first signal when the electrode was intermittently used at 4℃ during placing period of 7d.The concentration of phenol of samples in waste water from four different factories was both determined by the peroxidase electrode and spectrophotometry.It demonstrated that the relative deviation of two methods is in the range from-7.22% to 0.74%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Electrochemical Analysis and Applications · Advanced Chemical Sensor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.