article·2011-01-01Open access

Effect of silane coupling agent on the properties of aqueous polyurethane

Lei Wang

Open full text

Abstract

A series of waterborne polyurethane modified by silane coupling agent were prepared with isophorone isocyanate as hard segment,polyether polyol as soft segment,trimethylol propane as crosslinking agent and 3-aminopropyltriethoxysilane(APTES) as end capping agent for polyurethane prepolymer.The films of waterborne polyurethane were prepared.Mechanical properties,water contact angle and water resistance of the films were measured.The particle size and distribution of the emulsion was tested by dynamic laser light scattering(DLS).FT-IR indicates that APTES reacted with —NCO of polyurethane.Thermogravimetry analysis indicates that modification of APTES for polyurethane increased thermal stability of polyurethane.It was found that tensile strength of modified polyurethane increased and the elongation at break decreased with increasing w(APTES),water and solvent resistance increased.TEM manifested emulsion particles are spherical.DLS showed that particle size of emulsion increases with increasing w(APTES).Pencil hardness of modified polyurethane films can reach 2H,pendulum hardness is 0.73 and impact resistance meets GB/T1732-93.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.