article·2014-01-01Open access

Study of electroless Ni / Sn plating on Kevlar fiber

Bai Mia

Open full text

Abstract

Electroless coating of Ni /Sn on Kevlar fiber and its metallization were operated. The surface appearance,composition and phase of Kevlar fiber were investigated by means of SEM,EDS and XRD. The corrosion resistance,adhesion strength and electrical conductivity were also measured. The results showed that the pretreatment was necessary for getting clean,catalytic and favorable layer. The compact Ni-layer could be obtained by plating 120 min at pH value of 6,the adhesion strength was excellent and coating thickness reached 752 nm. The coating thickness of the compact Ni / Sn-layer obtained by plating 150 min at pH value of 0. 8-1. 2 was 1. 4 μm and combined well with Kevlar. The fibers of electroless Ni /Sn had a good corrosion resistance,adhesion strength and electrical conductivity,it could be well used for electronic component and electromagnetic shielding.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.