Preparation of porous alumina ceramic with uniform cell size by centrifugation-template method
Source abstract
Abstract
Epispastic polystyrene(EPS) spheres with uniform diameters were used to array ordered templates and then centrifuging in them prepared porous alumina with uniform cell size.The adjustment of cell structure and effect of centrifugal parameters on green density of cell wall were studied.According to TG-DTG curves,the sintered schedule was decided.The microstructure of final products was observed by scanning electron microscope.The results showed the cell structure was adjusted by changing the diameters of EPS spheres and additional loads exerted on them.The mass segregation derived from centrifugation was hindered with the 50vol% slurries.Cell wall had high green density(63.4%) and sintered density(98.8%).When the porosity of final products increased from 75.6% to 83.2%,their compressive strength decreases from 3.2MPa to 1.78MPa.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Mesoporous Materials and Catalysis · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.