Fabrication and performance of sulfur tolerant IT-SOFC based on VO_x-Cu impregnated YSZ composite anode support
Source abstract
Abstract
In this work,YSZ green tape was prepared by tape-casting technique,10Sc1CeSZ electrolyte was deposited on it by screen printing.The bilayer of porous YSZ substrate supported dense 10Sc1CeSZ electrolyte thin film was successfully obtained after the co-sintering process.Then,CGO and LSC films were deposited on the surface of the 10Sc1CeSZ successively by screen printing method.V2O5-CuO-YSZ composite anodes were acquired by impregnation.Microstructures analysis of bilayer before and after impregnation by SEM showed that the electrolyte was very dense,the holes in porous YSZ were connected and the catalyst uniformly distributed in the holes.At 800℃,using humidified pure H2 and syngas(40%H2,60%CO)containing 5.2×10-3 H2S as fuels,the open cell voltage(OCV) were 1.08 and 1.07V,respectively,and the maximum power densities were nearly same with the value of 37mW/cm2.The testing results demonstrated that the cells with the impregnated VOx-Cu had stable performance fed by H2S containing-syngas.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.