article·2014-01-01Open access

Study on the preparation and properties of glass fiber/PCBT composites by in-situ polymerization

Zhou Hai-ju

Open full text

Abstract

Glass fiber(GF)reinforced poly(cyclic butylene terephthalate)(PCBT)composites were prepared by in-situ polymerization of cyclic butylene terephthalate(CBT).The effects of the polymerization temperature and the catalyst content on the viscosity average molecular weight,the crystallinity of PCBT and the mechanical properties of GF/PCBT composites were investigated.The experimental results indicated that the viscosity-average molecular weight and the crystallinity of PCBT were gradually increased and finally tended to stabilization with increasing of polymerization temperature.The mechanical properties of the GF/PCBT composites were constantly strengthened with increasing of polymerization temperature.When the polymerization temperature was 210℃,the viscosity-average molecular weight of PCBT was 7.16×104 g/mol,and its crystallinity reached43.9%,the tensile strength and flexural strength of the GF/PCBT composites was(271.44±3.40)and(257.70±3.73)MPa,respectively.With increasing of catalyst mass fraction,the viscosity-average molecular weight and the crystallinity of PCBT were gradually increased and finally tended to stabilization.The mechanical properties of the GF/PCBT composites were constantly strengthened with increasing of catalyst mass fraction.When the catalyst mass fraction reached 0.4wt%,the viscosity-average molecular weight of PCBT was7.13×104 g/mol,and its crystallinity reached 44.4%,the tensile strength and flexural strength of the GF/PCBT composites was(265.10±3.31)and(260.30±2.03)MPa,respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.