Study the tunnel defects of die casting AZ91D magnesium alloy with FSW drive model
Source abstract
Abstract
Die casting plates of AZ91D magnesium alloy,were welded by friction stir welding,with different welding parameter,then study the microstructure by OM and SEM.The results show that AZ91D plates with thickness of 4mm,were welded by friction stir welding,when weld speed over 60mm/min,and the joint are easier to generate through type tunnel defects,which was usually locate in the boundary between crown zone and ring zone of advancing side,then spread to the bottom of weld followed by the weld speed increasing.The formation mechanism of the defect as follows: crown area plastic material are drived by shoulder and tool pin,but the ring area plastic material were drived just by tool pin.The different driving mode,which can be caused flow differences between crown zone and ring zone.This phenomenon will be product through type tunnel defects.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.