article·2013-01-01Open access

Effect of Ce on microstructure and deformation performance of ZK20 alloy

Li Qua

Open full text

Abstract

The effects of different Ce contents on the microstructure,mechanical properties and performance of hot deformation were investigated.By methods of OM,X-ray,SEM,XRD,tensile test at room temperature and hot compression test on Gleeble 1500Dthermal-mechanical simulator,the mechanism properties of Ce element in ZK20and its effect on microstructure were analyzed.The results showed that within the experimental range(0to 0.68% Ce(mass fraction,the same below)),the phaseτwere increased with the addition of Ce, the form were changed to the discontinuity mesh and mesh in the alloy by hot extrusion.Ce element could improve the recrystallization of the alloy.The grain size continuously decreased with increasing Ce.The extruded alloy exhibted best mechanical properties with the 0.7%addition of Ce.Its room temperature tensile strength was 261MPa,yield strength was 198MPa,elongation was 24.6%.Annealing process in condition of 280 ℃ and 4hcould contribute to the strength and ductility of the alloy.Its tensile strength was improved to 272 MPa,yield strength was improved to 209MPa,and elongation was 26%.The addition of Ce into ZK20alloy could cause the transition of brittle fracture to brittle and dimple mixed fracture.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.