article·2007-01-01Open access

Orthogonal design for fabrication of transparent conductive ZnO:Al films by DC magnetron sputtering at low temperature

Wu Zhe

Open full text

Abstract

Based on orthogonal design,Aluminium-doped zinc oxide(ZnO∶Al) films were prepared by D.C.reactive magnetron sputtering on glass substrate from an alloy target(Zn∶Al 2wt%).The temperature of the sputtering chamber was kept at 50℃.Mathematical statistical method was employed to analyze the experimental results derived from optical and electrical measurements with spectrophotometer and Hall-effect measurement system.Dependences of the films' optical-electrical properties on the four main factors such as sputtering time,target-substrate distance,sputtering power,O2 flow rate were investigated respectively.The comprehensive optimal fabrication condition of ZAO films was obtained as well ultimately,that is 20min in sputtering time,6cm in targetsubstrate distance,and 80W in sputtering power,7percent in flow rate;the corresponding film's Фic value is 4.1050×10-2/Ω,resistivity is 3.9×10-4Ω·cm and 1.09×1021/cm3 of carrier concentration.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.