Preparation and performance of alkali lignin/chitosan reaction film
Source abstract
Abstract
With chitosan and alkali lignin as raw materials,glutaraldehyde as cross-linking agent,the alkali lignin/chitosan reaction film was prepared,the physical properties of the films were measured.The results show that the optimum conditions to prepare the alkali lignin/chitosan reaction film are as follows: the mass ratio of hydroxymethylated alkali lignin and chitosan 1∶2,the mass fraction of glutaraldehyde solution and glycerol respectively 0.3% and 0.5%,the reaction tempareture 25℃,the reaction time 6h.The film-forming liquid was got after it han been defoamed for 2h in vacuum condition,then layed and dryed at 50℃.The thickness of the film was 12-13μm and the tensile strength was 27-28N.The degree of swelling was 28.4%.The hydroxymethylated alkali lignin was evenly distributed in the chitosan film.The hydroxyl groups of hydroxymethylated alkali lignin or chitosan have a crosslinking reaction with glutaraldehyde.For the alkali lignin has astrong acid resistance and hydroxymethylated alkali lignin has better alkali resistance than the alkali lignin,the alkali lignin /chitosan reaction film maintains the usability in strong acid and strong alkaline solution.The ability of resistance to acid and alkali of the reaction film was improved.Scope of application of pH was 1 to 14 wich expands the range of application of the film.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.