Improve mechanical properties of waterborne polyurethane/hydroxyapatite nanocomposites through ionic bonds between the two phases
Source abstract
Abstract
There had been some reports about waterborne polyurethane/hydroxyapatite(WBPU/HA) nanocomposites.Among them,few focused on reinforcement of the composites through ionic bonds.In this paper,we prepared stable hydrocolloids of both anionic WBPU and cationic HA.The latter was synthesized in the presence of aminoethyl phosphate(AEP) that imparted ammonium cations onto the HA particles.This colloid was then transformed into an anionic colloid by adding citrate ions.Thereafter,both the PU and HA colloids were mixed homogenously,followed by removing the citrate ions through dialysis.The dialyzed mixtures were dried to obtain WBPU/HA nanocomposites with good mechanical properties.In parallel with the increase of the HA content from 0 to 15wt%,the tensile strength of the composite increased from 10.9 to 22.3 MPa,corresponding to a 100% gain.This remarkable reinforcement was due to the ionic bonds between the carboxylate groups in the PU chains and the ammonium or calcium ions on the HA nanoparticles.When the HA content was over 20wt%,the mechanical strength decreased due to the severe aggregation among the HA particles,as observed by transmission electron microscopy.This paper provides a new method based on colloidal chemistry to prepare nanocomposites that are reinforced through ionic bonds.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer composites and self-healing · biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.