Effect of SD binder on microstructure and mechanical properties of Ti(C,N)-based cermets
Source abstract
Abstract
Effect of SD binder on contents of carbon,phase composition,microstructure and mechanical properties of the Ti(C,N)-based cermets which prepared by the low pressure sintering technology were determined through chemical analysis,X-ray diffraction(XRD),back scattering scanning electron microscopy(BSE) and energy dispersive spectrometer(EDS),respectively.The conclusions are as follows: the total carbon content of cermets compacts after debinding increases and the nitrogen content decreases as the SD binder increases.There are only two phases,(Ti,Me)(C,N)(Me=W,Mo,Ta) and Ni/Co solid solution existing in the Ti(C,N)-based cermets after sintering.The alloy exhibits a big volume fraction of black core-white rim structure.Meanwhile,small amount of white core-grey rim structure also exists.The preferable synthetically mechanical properties with transverse rupture strength of 1929MPa and a hardness of 1588HV30 can be obtained when 100mL/kg of SD binder was added.When the addition of SD binder is 180mL/kg,the graphite phase appears,causing significant decrease in the transverse rupture strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.