Microstructure and electrochemical performances of the La-Mg-Ni based (PuNi_3-type) hydrogen atorage alloys
Source abstract
Abstract
The La-Mg-Ni based (PnNi_3-type) hydrogen storage alloys La_2Mg(Ni_(0.85)Co_(0.15))_9B_x(x=0, 0.1, 0.2) were prepared by casting and rapid quenching. The microstructures and electrochemical performances of the as-cast and quenched alloys were determined and measured. The effects of boron content and quenching rate on the microstructures and electrochemical properties of the alloys were investigated in detail. The results show that the as-cast and quenched alloys are composed of the (La, Mg)Ni_3 phase, the LaNi_5 phase and the LaNi_2 phase. A trace of the Ni_2B phase exists in the as-cast alloys containing boron, and after the as-cast alloys are quenched, the Ni_2B phase in the alloys nearly disappears. The relative amount of each phase in the alloys depends on the quenching rate. The addition of boron enhances the cycle stability of the as-cast and quenching alloys, but decreases the discharge capacity of the alloys. The capacity of the alloys without boron monotonously decreases with the increase of the quenching rate. In the case of the alloys containing boron, the capacities have a maximum value when varying the quenching rate. The cycle stability of the as-quenched alloys increases with increasing quenching rate. The activation performances of the as-cast and quenched alloys are excellent.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.