article·2014-01-01Open access

Force-sensitive properties of FeCuNbSiB powder/butyl rubber composite films

Zhou Ji

Open full text

Abstract

Composite film was prepared by molding method with amorphous Fe73.5Cu1Nb3Si13.5B9 powder as compound phase and butyl rubber as matrix phase.The particle size was 45μm,the content of powder was 85% and the thickness of film was 150or 200μm.LYYL-500Nhigh-grade type microcomputer control pressure testing machine was used to conduct program control loading with speed of 0.1,0.5and 1.0mm/min.Values of impedance,Z,under pressure stress were measured by TH2816LCR digital bridge with 1and 50kHz.The paper study the effect of loading speed,testing frequency,film thickness and testing temperature on force-sensitive properties.The results show the force-sensitive stability property was best,when the loading speed was 0. 1mm/min.The sensitivity(|k|)of composite films increase firstly then decrease with the increasing stress during loading process,while it increase with the decreasing stress during uploading process.While the frequency was 1kHz,the force-sensitive sensitivity of composite films are better than 50kHz.The force-sensitive sensitivity of 200μm process are superior to 150μm.The higher temperature is,the better sensitivity of composite film is.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Roughness and Optical Measurements · Metallic Glasses and Amorphous Alloys · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.