article·2014-01-01Open access

Preparation and characterization of alumina fiber via solution blowing method

Le Li

Open full text

Abstract

Sol-gel and solution blowing techniques were incorporated to produce the as-spun alumina fiber followed by calcination.The resulting fibers were characterized using optical microscope,TGA and XRD.The results indicate that solgel solution viscosity plays the major role in as-spun fiber morphology and fiber diameter distribution.The as-spun fibers with a uniform diameter can be obtained when the solution viscosity was 3.10 Pa·s and the average diameter was 17.76μm.During the thermal treated process,the surfaces of the fibers are smooth with the low sintered temperature,whereas the temperature up to 900 ℃,the fibers become more fine and the surfaces was coarsen until 1 100 ℃.It can be found that the organic ingredients pyrolysis completely at 600 ℃.Finally,the resulting fibers with γ phase were obtained after1 100 ℃ sintered treatment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Advanced ceramic materials synthesis · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.