article·2012-01-01Open access

Study on the TiO_2 nanotube array films for photocathodic protection of 304 stainless steel

Changjian Lin

Open full text

Abstract

Highly ordered TiO2 or Fe doped TiO2 nanotube films were prepared on the surfaces of pure titanium by an anodic oxidation method in 0.5wt% NH4F+1.0mol/L(NH4)2SO4,0.5wt% HF and 0.5wt% HF+0.10mol/L Fe(NO3)3 solutions,respectively.The morphology,the structure and composition of the as-prepared TiO2 nanotube films were characterized by SEM,XRD and XPS.In the meantime,the performances of photocathodic protection of the films were evaluated by electrochemical measurements.The results indicated that the films mainly consisted of anatase TiO2.When 304 stainless steel in a 0.5mol/L NaCl solution was coupled to the TiO2 film in a 0.4mol/L Na2SO4 solution,its interfacial reaction resistance and the electrode potential decreased steeply under ultraviolet illumination,which indicated that TiO2 nanotube arrays could produce a good photocathodic protection effect for the stainless steel.Especially the potential of 304 stainless steel coupled to the Fe doped TiO2 film decreased by 450mV under illumination,and remained lower than the corrosion potential after the light source was cut off for about 6h,showing a better photocathodic protection effect.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Water Quality Monitoring and Analysis · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.