Studies on tunable F-P cavity based on doped unsaturated polyester
Source abstract
Abstract
In this work a new method to prepare Fabry Perot (F P) cavity for optical switch was proposed by filled with unsaturated polyester (UP) resins doped with disperse red 1 (DR 1), and thermal cured in polariza tion process thereafter. Effects of temperature, initiator and DR 1 content on gel and curing time of UP resins were studied. With increasing content of DR1, the gel time is reduced and the curing time was increased. When the content of DR1 was greater than 5%, the resin is no longer suitable for polarization because of long curing time. However, the gel and curing time of the resin can also be reduced by increasing initiator concentration and improving the temperature. After polarization, the optic loss of total F P cavity was 5dB, and electro optic coef ficient r33 was 9pm/V. The maximum decay is 52%, which is lower than the widely studied PMMA/DR1 sys tem. The manufacturing technology for such device was significantly superior to the traditional spin coating method. All of these convinced this novel method to be much fit for making tunable F P cavity for optical switch.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Photonic and Optical Devices · Synthesis and properties of polymers · Advanced Optical Network Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.