article·2002-01-01Open access

Study on preparation and properties of YSZ electrolyte membrane tubes with low cost

HE Tian-min

Open full text

Abstract

8mol% YSZ electrolyte membrane tubes with a thickness of 0.2mm were made by the vacuum casting method. The sintered densities, the microstructure and electrical conductivity of the YSZ electrolyte membrane tubes were studied by using archimeds water immersion technique, SEM and complex impedance, respectively. The sintering temperature of obtained optimal sinterability for the YSZ electrolyte membrane tubes was determined. The research results show that the vacuum casting is a simple way preparing the YSZ electrolyte membrane tubes with high density and high electrical conductivity. The YSZ electrolyte membrane tubes with the relative density of 98.7% and 254mm in length are fabricated using this method. The ranges of sintering temperatures are 190~200℃ lower than that of the conventional slip casting. The densification and the electrical conductivity of the samples increase gradually with increasing of the sintering temperatures. The density and electrical conductivity of the samples reach an optimum value at the sintered temperature of 1600℃ for 2h. As the sintering temperatures were raised further, both the density and the electrical conductivity of the samples decrease.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.