journal article·2023-08-29Open access

Polymer Mixtures for Experimental Self-Limited Dental Burs Development—A Preliminary Approach (Part 1)

Radu Marcel Chisnoiu, Alexandrina Muntean, Ovidiu Păstrav, Andrea Maria Chisnoiu, Stanca Cuc, Laura Silaghi Dumitrescu, Mihaela Păstrav, Doina Prodan, Ada Gabriela Delean

Abstract

Alternative techniques have been investigated for effectiveness in caries removal because conventional metallic dental burs can lead to an excessive loss of sound tissue. The aim of the present study is to realize a preliminary approach in obtaining effective polymer mixtures for polymeric bur development, capable of removing primary dental caries using combinations of polymers to ensure the requirements for such instruments, but also a greater compatibility with the teeth structure. This study assessed the main mechanical properties, water sorption, solubility and microscopic structure of four new polymer mixture recipes to provide essential features in obtaining experimental self-limited dental burs. Two mixtures have in their composition polymer mixtures of Bis-phenol A diglycidyl ether dimethacrylate/Triethylene glycol dimethacrylate/Urethane dimethacrylates (R1, R2), and two other mixtures have Bis-phenol A diglycidyl ether dimethacrylate/Polymethyl methacrylate/Methyl methacrylates (R3, R4). The incorporation of nanoparticles into the polymer matrix has become essential due to the need of polymer biocompatibility increasing along with teeth surface remineralization, so that the powder charge was added to four recipes, such as 5% glass with BaF2 and 0.5% graphene with silver particles. All data sets were analyzed using the One-Way ANOVA test. R3, R4 showed higher compressive strength and diametrical compression values; these values increased when glass and graphene were added. Moreover, the addition of glass particles lead to an increase in flexural strength. Regarding the sorption, sample R3 had the most significant differences between day 69 and the rest of the investigation days, while the solubility varied at different intervals. From the mechanical evaluation, we could conclude that the Bis-GMA/PMMA/MMA mixtures fit the mechanical characteristics supported by polymer burs, following future studies regarding their use on the affected dentin.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Odontology, Endodontics and Oral Pathology, “Iuliu Hațieganu” University of Medicine and Pharmacy, 33 Moților Street, 400001 Cluj-Napoca, Romania

Department of Pedodontics, “Iuliu Hațieganu” University of Medicine and Pharmacy, 31 Avram Iancu Street, 400083 Cluj-Napoca, Romania

Department of Prosthodontics, “Iuliu Hațieganu” University of Medicine and Pharmacy, 32 Clinicilor Street, 400006 Cluj-Napoca, Romania

“Raluca Ripan” Institute for Research in Chemistry, Babes-Bolyai University, 30 Fantanele Street, 400294 Cluj-Napoca, Romania

Department of Orthodontics, “Iuliu Hațieganu” University of Medicine and Pharmacy, 31 Avram Iancu Street, 400083 Cluj-Napoca, Romania

Funding

“Iuliu Hațieganu” University of Medicine and Pharmacy Cluj-Napoca, Romania

References (39)

Show source-provided references
1. Digital image analysis method to assess the performance of conventional and self-limiting concepts in dentine caries removal10.1016/j.jdent.2013.03.003 ↗
2. New device for selective dentin caries removal
3. Histological determination of cariously altered collagen after dentin caries excavation with the polymer bur PolyBur P1 in comparison to a conventional bud bur10.1186/s13005-019-0205-9 ↗
4. Removing carious dentin using a polymer instrument without anesthesia versus a carbide bur with anesthesia10.14219/jada.archive.2005.0237 ↗
5. Differential Resin-Dentin Bonds Created after Caries Removal with Polymer Burs10.1017/S1431927612000074 ↗
6. Polymer burs remove less sound dentin and are as effective as carbide burs in caries removal
7. A comparative evaluation of dentin caries removal with polymer bur and conventional burs—An in vitro study10.4236/ojst.2012.21002 ↗
8. Comparison of efficacy of caries removal using polymer bur and chemomechanical caries removal agent: A clinical and microbiological assessment—An in vivo study10.4103/0970-4388.199232 ↗
9. Current Concepts and Techniques for Caries Excavation and Adhesion to Residual Dentin
10. Clinical evaluation of polyamide polymer burs for selective carious dentin removal10.5005/jcdp-10-4-26 ↗
11. Dental Poly(methyl methacrylate)-Based Resin Containing a Nanoporous Silica Filler
12. Monomer elution model of composite resin material
13. The Effect of UDMA/TEGDMA Mixtures and Bioglass Incorporation on the Mechanical and Physical Properties of Resin and Resin-Based Composite Materials
14. Bacali, C., Badea, M., Moldovan, M., Sarosi, C., Nastase, V., Baldea, I., Chiorean, R.S., and Constantiniuc, M. (2019). The Influence of Graphene in Improvement of Physico-Mechanical Properties in PMMA Denture Base Resins. Materials, 12.10.3390/ma12142335 ↗
15. Lee, S.J., Yoon, S.J., and Jeon, I.Y. (2022). Graphene/Polymer Nanocomposites: Preparation, Mechanical Properties, and Application. Polymers, 14.10.3390/polym14214733 ↗
16. Dental Glass Ionomer Cements as Permanent Filling Materials? –Properties, Limitations and Future Trends10.3390/ma3010076 ↗
17. Nanometals in dentistry: Applications and toxicological implications—A systematic review10.1007/s12011-019-01986-y ↗
18. Alternative monomer for BisGMA-free resin composites formulations10.1016/j.dental.2020.04.009 ↗
19. Optimal resin monomer ratios for light-cured dental resins10.1016/j.heliyon.2022.e10554 ↗
20. Synthesis and performance of experimental resin-based dental adhesives reinforced with functionalized graphene and hydroxyapatite fillers10.1016/j.matdes.2022.110985 ↗
21. Synthesis and characterization of graphene oxide-zirconia (GO-ZrO2) and hydroxyapatite-zirconia (HA-ZrO2) nano-fillers for resin-based composites for load-bearing applications10.1016/j.jdent.2020.103557 ↗
22. Prodan, D., Moldovan, M., Furtos, G., Saroși, C., Filip, M., Perhaița, I., Carpa, R., Popa, M., Cuc, S., and Varvara, S. (2021). Synthesis and Characterization of Some Graphene Oxide Powders Used as Additives in Hydraulic Mortars. Appl. Sci., 11.10.3390/app112311330 ↗
23. (2019). Dentistry-Polymer-Based Filling, Restorative and Luting Materials (Standard No. ISO Standard 4049).
24. Barszczewska-Rybarek, I.M., Chrószcz, M.W., and Chladek, G. (2020). Novel urethane-dimethacrylate monomers and compositions for use as matrices in dental restorative materials. Int. J. Mol. Sci., 21.10.3390/ijms21072644 ↗
25. Development of a new class of self-healing and therapeutic dental resins10.1016/j.polymdegradstab.2019.02.024 ↗
26. Szczesio-Wlodarczyk, A., Domarecka, M., Kopacz, K., Sokolowski, J., and Bociong, K. (2021). An Evaluation of the Properties of Urethane Dimethacrylate-Based Dental Resins. Materials, 14.10.3390/ma14112727 ↗
27. De Angelis, F., Vadini, M., Buonvivere, M., Valerio, A., Di Cosola, M., Piattelli, A., Biferi, V., and D’Arcangelo, C. (2023). In Vitro Mechanical Properties of a Novel Graphene-Reinforced PMMA-Based Dental Restorative Material. Polymers, 15.10.3390/polym15030622 ↗
28. Methacrylate perspective in current dental practice10.1111/jerd.12633 ↗
29. Graphene Oxide-based Experimental Silane Primers Enhance Shear Bond Strength between Resin Composite and Zirconia10.1111/eos.12665 ↗
30. Improving PMMA Resin Using Graphene Oxide for a Definitive Prosthodontic Rehabilitation—A Clinical Report
31. Mechanical properties of graphene and graphene-based nanocomposites10.1016/j.pmatsci.2017.07.004 ↗
32. Zafar, M.S. (2020). Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update. Polymers, 12.10.3390/polym12102299 ↗
33. Residual methyl methacrylate monomer, water sorption, and water solubility of hypoallergenic denture base materials10.1016/j.prosdent.2004.04.003 ↗
34. Flexural strengths of fiber-reinforced composites polymerized with conventional light-curing and additional postcuring10.1016/j.ajodo.2005.09.036 ↗
35. Accelerated Fatigue Resistance of Bonded Composite Resin and Lithium Disilicate Screw-Retained Incisor Crowns with Long and Short Titanium Bases10.11607/prd.5736 ↗
36. Efficacy of polishing kits on the surface roughness and color stability of different composite resins10.4103/1119-3077.181387 ↗
37. Hada, T., Kanazawa, M., Iwaki, M., Katheng, A., and Minakuchi, S. (2021). Comparison of Mechanical Properties of PMMA Disks for Digitally Designed Dentures. Polymers, 13.10.3390/polym13111745 ↗
38. Novel mechanically strong and antibacterial dimethacrylate copolymers based on quaternary ammonium urethane-dimethacrylate analogues10.1016/j.dental.2023.05.008 ↗
39. Evaluation of abrasive wear resistance of polymethyl methacrylate material reinforced with zirconium and dental stone