journal article·2023-07-19Open access

Influence of Dynamic Strain Sweep on the Degradation Behavior of FeMnSi–Ag Shape Memory Alloys

Ana-Maria Roman, Ramona Cimpoeșu, Bogdan Pricop, Nicoleta-Monica Lohan, Marius Mihai Cazacu, Leandru-Gheorghe Bujoreanu, Cătălin Panaghie, Georgeta Zegan, Nicanor Cimpoeșu, Alice Mirela Murariu

Abstract

Iron-based SMAs can be used in the medical field for both their shape memory effect (SME) and biodegradability after a specific period, solving complicated chirurgical problems that are partially now addressed with shape-memory polymers or biodegradable polymers. Iron-based materials with (28–32 wt %) Mn and (4–6 wt %) Si with the addition of 1 and 2 wt % Ag were obtained using levitation induction melting equipment. Addition of silver to the FeMnSi alloy was proposed in order to enhance its antiseptic property. Structural and chemical composition analyses of the newly obtained alloys were performed by X-ray diffraction (confirming the presence of ε phase), scanning electron microscopy (SEM) and energy-dispersive spectroscopy. The corrosion resistance was evaluated through immersion tests and electrolyte pH solution variation. Dynamic mechanical solicitations were performed with amplitude sweep performed on the FeMnSi–1Ag and FeMnSi–2Ag samples, including five deformation cycles at 40 °C, with a frequency of 1 Hz, 5 Hz and 20 Hz. These experiments were meant to simulate the usual behavior of some metallic implants subjected to repetitive mechanical loading. Atomic force microscopy was used to analyze the surface roughness before and after the dynamic mechanical analysis test followed by the characterization of the surface profile change by varying dynamic mechanical stress. Differential scanning calorimetry was performed in order to analyze the thermal behavior of the material in the range of −50–+200 °C. X-ray diffraction and Fourier transform infrared spectroscopy (FTIR) along with Neaspec nano-FTIR experiments were performed to identify and confirm the corrosion compounds (oxides, hydroxides or carbonates) formed on the surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Materials Science and Engineering, “Gheorghe Asachi” Technical University of Iași, Blvd. Dimitrie Mangeron 71A, 700050 Iași, Romania

Physics Department, “Gheorghe Asachi” Technical University of Iași, Blvd. Dimitrie Mangeron 71A, 700050 Iași, Romania

Faculty of Dental Medicine, “Grigore T. Popa” University of Medicine and Pharmacy University, 16 University Street, 700115 Iasi, Romania

Department of Surgicals, Faculty of Dental Medicine, “Grigore T. Popa” University of Medicine and Pharmacy, 16 University Street, 700115 Iasi, Romania

Funding

Ministry of Research, Innovation and Digitization · Executive Agency for Higher Education, Research, Development and Innovation, UEFISCDI, and ROBIM

References (85)

Show source-provided references
1. Design of biodegradable, implantable devices towards clinical translation10.1038/s41578-019-0150-z ↗
2. Istrate, B., Munteanu, C., Antoniac, I.-V., and Lupescu, Ș.-C. (2022). Current Research Studies of Mg–Ca–Zn Biodegradable Alloys Used as Orthopedic Implants—Review. Crystals, 12.10.3390/cryst12101468 ↗
3. Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility10.1016/j.actbio.2019.07.038 ↗
4. Recent advancements in Fe-based biodegradable materials for bone repair10.1007/s10853-018-3011-z ↗
5. In vitro and 48 weeks in vivo performances of 3D printed porous Fe-30Mn biodegradable scaffolds10.1016/j.actbio.2020.12.028 ↗
6. Gąsior, G., Szczepański, J., and Radtke, A. (2021). Biodegradable Iron-Based Materials—What Was Done and What More Can Be Done?. Materials, 14.10.3390/ma14123381 ↗
7. Fabrication of a biodegradable Fe-Mn-Si alloy by field assisted sintering10.1016/j.apt.2020.10.012 ↗
8. Essentiality of Manganese for Bone Health: An Overview and Update
9. Silicon in medicine and therapy
10. Iron and iron-based alloys for temporary cardiovascular applications10.1007/s10856-015-5473-8 ↗
11. Novel biodegradable Fe-Mn-C-S alloy with superior mechanical and corrosion properties10.1016/j.matlet.2016.10.037 ↗
12. Shape Memory behavior of porous NiTi alloy10.1007/s11661-015-3318-1 ↗
13. Biodegradable Fe-based alloys for use in osteosynthesis: Outcome of an in vivo study after 52 weeks10.1016/j.actbio.2014.04.007 ↗
14. Progress of biodegradable metals10.1016/j.pnsc.2014.08.014 ↗
15. Porous metal for orthopedics implants
16. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
17. An overview of nitinol medical applications10.1016/S0921-5093(99)00294-4 ↗
18. Current status and outlook on the clinical translation of biodegradable metals10.1016/j.mattod.2018.05.018 ↗
19. Biodegradable polymers—A review on recent trends and emerging perspectives10.1007/s10924-011-0317-1 ↗
20. Alpha keratin amino acids BEHVIOR under high FLUENCE laser interaction. Medical applications10.1016/j.apsusc.2019.05.207 ↗
21. Medical shape memory alloy applications-the market and its products10.1016/j.msea.2003.10.326 ↗
22. Shape recovery characteristics of biaxially prestrained Fe–Mn–Si-based shape memory alloy10.1016/j.msea.2007.02.149 ↗
23. Biodegradable shape memory alloys: Progress and prospects10.1016/j.biomaterials.2021.121215 ↗
24. Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial10.1007/s10856-010-4070-0 ↗
25. Design strategy for biodegradable Fe-based alloys for medical applications10.1016/j.actbio.2009.07.039 ↗
26. Addressing the slow corrosion rate of biodegradable Fe-Mn: Current approaches and future trends10.1016/j.cossms.2020.100822 ↗
27. Novel Fe–Mn–Si–Pd alloys: Insights into mechanical, magnetic, corrosion resistance and biocompatibility performances10.1039/C6TB01951J ↗
28. Cimpoesu, N., Sandulache, F., Istrate, B., Cimpoesu, R., and Zegan, G. (2018). Electrochemical behavior of biodegradable FeMnSi–MgCa alloy. Metals, 8.10.3390/met8070541 ↗
29. In vitro degradation and biocompatibility of Fe-Pd and Fe-Pt composites fabricated by spark plasma sintering10.1016/j.msec.2013.10.023 ↗
30. Microstructure, mechanical and corrosion properties of biodegradable powder metallurgical Fe- 2wt % X (X = Pd, Ag and C) alloys10.1016/j.matchemphys.2016.06.087 ↗
31. Fe-Au and Fe-Ag composites as candidates for biodegradable stent materials10.1002/jbm.b.33389 ↗
32. Castiglioni, S., Cazzaniga, A., Locatelli, L., and Maier, J.A.M. (2017). Silver Nanoparticles in Orthopedic Applications: New Insights on Their Effects on Osteogenic Cells. Nanomaterials, 7.10.3390/nano7060124 ↗
33. A pharmacological and toxicological profile of silver as an antimicrobial agent in medical devices
34. Silver in health care: Antimicrobial effects and safety in use10.1159/000093928 ↗
35. Solidification Microstructure and Magnetic Properties of Ag-Rich Ag–Cu–La–Fe Immiscible Alloys10.2320/matertrans.Z-M2019857 ↗
36. Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications10.1007/s11661-015-2932-2 ↗
37. Design of Fe–Mn–Ag alloys as potential candidates for biodegradable metals10.1007/s40195-018-0702-z ↗
38. Biodegradation behaviour of Fe-based alloys in Hanks’ Balanced Salt Solutions: Part I. material characterisation and corrosion testing10.1016/j.bioactmat.2021.05.048 ↗
39. Biodegradation behaviour of Fe-based alloys in Hanks’ Balanced Salt Solutions: Part II. The evolution of local pH and dissolved oxygen concentration at metal interface10.1016/j.bioactmat.2021.05.014 ↗
40. Design and characterization of nano and bimodal structured biodegradable Fe-Mn-Ag alloy with accelerated corrosion rate10.1016/j.jallcom.2018.07.206 ↗
41. Novel antibacterial biodegradable Fe-Mn-Ag alloys produced by mechanical alloying10.1016/j.msec.2018.03.005 ↗
42. Effect of silver additions on the microstructure, mechanical properties and corrosion behavior of biodegradable Fe-30Mn-6Si. Mater
43. Corrosion mechanism of titanium dioxide nanotubes in Ringer’s solution10.1016/j.mtcomm.2021.102943 ↗
44. Evaluation of electrochemical impedance and biocorrosion characteristics of as-cast and T4 heat treated AZ91 Mg-alloys in Ringer’s solution10.1016/j.jma.2019.01.005 ↗
45. Electrochemical corrosion of metallic biomaterials10.1016/0142-9612(84)90046-2 ↗
46. In vivo metallic biomaterials and surface modification10.1016/S0921-5093(99)00101-X ↗
47. In vitro degradation behaviour, cytocompatibility and hemocompatibility of topologically ordered porous iron scaffold prepared using 3D printing and pressureless microwave sintering10.1016/j.msec.2019.110247 ↗
48. Fundamental theory of biodegradable metals—Definition, criteria, and design10.1002/adfm.201805402 ↗
49. Degradation performance of biodegradable Fe-Mn-C(-Pd) alloys10.1016/j.msec.2012.10.013 ↗
50. Exploring the Role of Manganese on the Microstructure, Mechanical Properties, Biodegradability, and Biocompatibility of Porous Iron-Based Scaffolds10.1021/acsbiomaterials.8b01497 ↗
51. Revie, W.R., and Uhlig, H.H. (2008). An Introduction to Corrosion Science and Engineering, John Wiley and Sons Inc.. [4th ed.].
52. Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies10.1016/j.actbio.2009.11.025 ↗
53. Istrate, B., Munteanu, C., Baltatu, M.S., Cimpoesu, R., and Ioanid, N. (2023). Microstructural and Electrochemical Influence of Zn in MgCaZn Biodegradable Alloys. Materials, 16.10.3390/ma16062487 ↗
54. Biodegradable porous FeMn (–x Ag) alloys: Assessment of cytocompatibility, mechanical, magnetic and antibiofilm properties10.1039/D2MA00867J ↗
55. Krüger, J.T., Hoyer, K.P., Huang, J., Filor, V., Mateus-Vargas, R.H., Oltmanns, H., Meißner, J., Grundmeier, G., and Schaper, M. (2022). FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. J. Funct. Biomater., 13.10.3390/jfb13040185 ↗
56. Saliba, L., Sammut, K., Tonna, C., Pavli, F., Valdramidis, V., Gatt, R., Giordmaina, R., Camilleri, L., Atanasio, W., and Buhagiar, J. (2023, March 25). FeMn and FeMnag Biodegradable Alloys: An In Vitro And In Vivo Investigation. Available online: https://ssrn.com/abstract=4325636.10.1016/j.heliyon.2023.e15671 ↗
57. Degradable metallic biomaterials: Design and development of Fe-Mn alloys for stents10.1002/jbm.a.32224 ↗
58. Effect of silicon on atomic distribution and shape memory in Fe–Mn base alloys10.1016/j.msea.2005.05.043 ↗
59. Physical Properties of Iron-Oxide Scales on Si-Containing Steels at High Temperature10.2320/matertrans.M2009097 ↗
60. Martensitic transformations and mechanical and corrosion properties of Fe-Mn-Si alloys for biodegradable medical implants10.1007/s11661-017-4458-2 ↗
61. Influence of Dynamic Three Point Bending on the Work Hardening Capacity of T105Mn120 Manganese Steel10.1007/s11665-018-3658-2 ↗
62. Thermo-mechanical effects caused by martensite formation in powder metallurgy FeMnSiCrNi shape memory alloys10.1080/00325899.2018.1492773 ↗
63. Progress in manufacturing and processing of degradable Fe-based implants: A review10.1007/s40204-022-00189-4 ↗
64. Additively manufactured biodegradable porous iron10.1016/j.actbio.2018.07.011 ↗
65. Updates on the research and development of absorbable metals for biomedical applications10.1007/s40204-018-0091-4 ↗
66. Effects of alloying elements (Mn, Co, Al, W, Sn, B, C and S) on bio-degradability and in vitro biocompatibility of pure iron10.1016/j.actbio.2010.11.001 ↗
67. Effect of manganese on the corrosion behaviour of chromium-bearing amorphous metal-metalloid alloys
68. Salama, M., Vaz, M.F., Colaço, R., Santos, C., and Carmezim, M. (2022). Biodegradable Iron and Porous Iron: Mechanical Properties, Degradation Behaviour, Manufacturing Routes and Biomedical Applications. J. Funct. Biomater., 13.10.3390/jfb13020072 ↗
69. The corrosion behavior of Fe-based shape memory alloys10.1016/S0010-938X(02)00027-6 ↗
70. Jones, D.A. (1996). Principles and Prevention of Corrosion, Prentice Hall. [2nd ed.].
71. The effect of solution treatment temperature on SIEM and shape recovery of FeeMneSi shape memory alloy10.1016/j.jmrt.2021.08.009 ↗
72. Corrosion inhibition of copper with octadecylphosphonic acid (ODPA) in a simulated indoor atmospheric environment10.1016/j.corsci.2021.109777 ↗
73. Nano-FTIR microscopy and spectroscopy studies of atmospheric corrosion with a spatial resolution of 20 nm10.1016/j.corsci.2016.02.037 ↗
74. Pretsch, E., Buhlmann, P., and Badertscher, M. (2009). Tables of Spectral Data, Springer. [4th ed.]. Revised and Enlarged Edition.
75. Transverse scattering and generalized kerker effects in all-dielectric mie-resonant metaoptics10.1103/PhysRevLett.122.193905 ↗
76. Infrared Spectra and Characteristic Frequencies of Inorganic Ions10.1021/ac60068a007 ↗
77. Adsorption and desorption of uranium(VI) by Fe-Mn binary oxide in aqueous solutions10.1007/s10967-015-4453-2 ↗
78. Synthesis and characterization of a novel MnOx-loaded biochar and its adsorption properties for Cu2+ in aqueous solution10.1016/j.cej.2013.12.061 ↗
79. The mechanism of antimony(III) removal and its reactions on the surfaces of Fe-Mn Binary Oxide10.1016/j.jcis.2011.07.026 ↗
80. Near-Field Probing of Vibrational Absorption for Chemical Microscopy10.1038/20154 ↗
81. Nano-FTIR absorption spectroscopy of molecular fingerprints at 20 nm spatial resolution10.1021/nl301159v ↗
82. FTIR spectroscopic semi-quantification of iron phases: A new method to evaluate the protection ability index (PAI) of archaeological artefacts corrosion systems10.1016/j.corsci.2018.01.016 ↗
83. Structure and properties of carboxymethyl cellulose/soy protein isolate blend edible films crosslinked by Maillard reactions10.1016/j.carbpol.2009.07.035 ↗
84. Complex IR spectra of OH− groups in silicate glasses: Implications for the use of the 4500 cm−1 IR peak as a marker of OH− groups concentration10.2138/am-2015-5076 ↗
85. Cocean, A., Cocean, G., Diaconu, M., Garofalide, S., Husanu, F., Munteanu, B.S., Cimpoesu, N., Motrescu, I., Puiu, I., and Postolachi, C. (2023). Nano-Biocomposite Materials Obtained from Laser Ablation of Hemp Stalks for Medical Applications and Potential Component in New Solar Cells. Int. J. Mol. Sci., 24.10.3390/ijms24043892 ↗