Effect of surface roughening on the manufacture and performance of IPMC
Source abstract
Abstract
Based on permeation and twice chemical reduction technology,IPMC specimens were manufactured in this research.Three kinds of surface roughen methods were utilized to roughen the surface of IPMC specimens base film.The roughening methods included manually polish,polishing machine and plasma surface roughening.The appearance and SEM features,electro-active deformation and surface resistance characteristics of these IPMC specimens were obtained and compared through the specimen tests.The results of tests indicated that the uniformity and the compactness of the metal deposited on the surface and inside of IPMC basal film are improved by the improvement of surface roughening uniformity.But the electro-active deformation capability and surface resistance of the specimens are decreased as the same time.An approximate linear increase relationship is indicated between the driving voltage and the bending deformation of IPMC specimen in the certain voltage range.The maximum electro-active bending deformation angles of the specimens,obtained under the same situation of specimen dimension,constrains and driving voltage(3V),are about 60° for the manually polish specimen,about 45° for the polishing machine roughening one and about 15° for the plasma treatment one respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.