Influences of strain rates on the superplastic deformation behavior in (Zr_(72)Cu_(16.5)Ni_(11.5))_(90)Al_(10) bulk amorphous alloy
Source abstract
Abstract
Through careful regulation of alloy composition and optimization of preparation processes,a(Zr72Cu16.5Ni11.5)90Al10 bulk amorphous alloy(BAA) with superplasticity at room temperature was prepared.The influence of strain rates on the superplastic deformation behavior of the BAA was systematically studied with strain rates ranging from 4.2×10-4 to 6.0×10-5s-1 under uniaxial compression at roomm temperature.The results showed that after severe deformation with an engineering strain up to 85.5%,i.e.,the true strain is larger than 193%,all BAA specimens haven't fractured,indicating the superplasticity of the BAA.With decreasing strain rates,the compressive strength,elastic modulus,plastic strain,stress peak interval and shear band sliding interval increase,while the elastic strain reduces.The density of the shear bands in the deformed side surfaces decreases with increasing strain rates.During the plastic flow,the obvious apparent strain-hardening can be found in the engineering stress-strain curves,while the real stress-strain curves exhibit significant strain-softening characteristics.After superplastic deformation,the propagation and distribution of shear bands in the side surfaces of the deformed specimen present different morphological characteristics,most of which have deviated from their idea positions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.