article·2010-01-01Open access

Effects of heating rate on densification and microstructure of Y-α-sialon ceramics

Zhang Li

Open full text

Abstract

The composition of yttrium-doped α-sialon was designed according to Y-Si-Al-O-N phase diagram,and the α-sialon with composition of Y0.4Si9.8Al2.2O1.0N15 was fabricated by hot pressing at 1900℃ for 30min,then the effects of heating rate on the densification,phase composition and microstructure were investigated.It was found that single phase α-sialon ceramics were prepared in all the samples,and all the densification process curves show the same changing tendency for the sialon sintered by different heating rate,but they parallel move to high temperature zone with the increase of heating rate,and the start and finish temperature of shrinkage,the peak value of shrinkage rate of the ceramics all increase with the increase of heating rate.Higher heating rate contribute to increase nucleation density and inhibit elongated grain developing,and the size and aspect ratio of elongated grains decrease with the increase of heating rate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.