article·2013-01-01Open access

Fabrication of stainless steel surface with high adhesive superhydrophobicity by femtosecond laser combined hydrothermal method

Wu B

Open full text

Abstract

High adhesive superhydrophobicity film was prepared on 316Lstainless steel surface by femtosecond laser combined hydrothermal method.Firstly,periodic spikes on micron scale were fabricated with laser fluence of 2.4J/cm2 in high vacuum.Secondly,a seed layer was prepared on the microstructured surface by magnetron sputtering.Finally,ZnO nanorods film was prepared on the seed layer by hydrothermal method.The microspikes and ZnO nanorods composed a dual-scale structure.SEM and XRD results revealed that the reaction was ZnO crystal with hexagonal wurtzite structure.The apparent contact angle on the dual-scale structure was 160.2°.Furthermore,the film had a high adhesive force to water.Based on the microstructure geometric model and hypothetical wetting state,the computational formula of apparent contact angle was produced.The calculated value accorded well with the experimental result.We provided an effective method to fabricate film with high adhesive superhydrophobicity on stainless steel surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Adhesion, Friction, and Surface Interactions · Fluid Dynamics and Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.