Effects of post-heat treatment on phase composition,surface morphology and bond strength of hydroxyapatite coatings
Source abstract
Abstract
Plasma spraying and post-heat treatment of hydroxyapatite(HA) coating have important effects on its microstructure,surface morphology and bond strength.This paper mainly deals with the effects of post-heat treatment on phase composition,surface morphology and bond strength of HA coatings from varied powder particles.HA coatings were prepared by plasma spraying different sizes of powders onto pure titanium substrates,and then post-heat treated at 650℃ for different time.To enhance the difference of coating crystallinities,samples were fabricated at 45kW for 38-75μm powder coating(FC) and at 35kW for 75-106μm powder coatings(CC),respectively.X-ray diffractometer(XRD),scanning electron microscope(SEM) and electron tensile machine were use to examine the phase composition,surface morphology and shear bond strength of samples.The results show that after the post-heat treatment at 650℃ for 0.5h,amorphous and decomposed phases in plasma sprayed samples transformed into crystalline HA completely.At the same time,microparticles with size of less than 300nm were formed on coating surfaces.It was also found that the post-heat treatment caused the decrease of bond strength of CC coatings,while the decrease of bond strength of FC coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Metal and Thin Film Mechanics · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.