article·2013-01-01Open access

Preparation and performances of RuO_2/CuO composite electrode materials

Lu Yu

Open full text

Abstract

Amorphous hydrous ruthenium oxide and copper oxide powders respectively prepared by a sol-gel process and low heat solid-state reaction. The ruthenium oxide-copper oxide composite electrodes with different copper oxide contents were prepared. The morphology of the composite electrode was investigated by SEM. Based on the cyclic voltammetry, AC impedance spectroscopy and constant current charge-discharge techniques,the performances of the electrodes were investigated. The results showed that the compositing of copper oxide and ruthenium oxide was beneficial to obtaining of fine particles and improving the impedance characteristic and conductivity. The results also showed that the composite electrode with 30%( mass fraction) copper oxide was ideal,and its specific capacitance and inner resistance were 513F / g and 0. 361Ω,respectively,measured at 5mV/sin 38%( mass fraction) H2SO4,after 400 cyclic-life,the specific capacitance of RuO2/CuO composite electrode maintained at 91.4%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.