Microstructures prepared with a femtosecond laser on medical 316L stainless steel surface and the blood compatibility study
Source abstract
Abstract
Microstructures with a good blood compatibility on the surface of stainless steel were prepared by using a femtosecond laser. The mechanism of the blood compatibility improvement was analyzed from the wettability of the microstructure perspective. With laser fluence increasing,we fabricated single typical laser-induced periodic surface structures( LIPSS) on the submicron scale and double-scale structure: periodic ripples and periodic cone-shaped spikes on the micron scale,both covered with LIPSS. After silanized,the apparent contact angles of these microstructures become larger than 150°,which meets the superhydrophobic performance requirements. With the laser fluence increasing,the apparent contact angles increase,and especially the contact angle of the cone-shaped double-scale structure reaches as high as163. 8°. The blood compatibility of the microstructures was evaluated with 3 conventional evaluation methods. The results show that the blood compatibility of the microstructures was significantly better than that of the polished surface,and that with the contact angles of the surface increasing,the blood compatibility can be further improved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.