article·2013-01-01Open access

Hot deformation behavior of Cu-Cr-Zr-Ce alloy at elevated temperature

Duan Qiu-hua

Open full text

Abstract

Cu-Cr-Zr series copper alloys are usually used as lead frame materials for integrated circuit(IC) with high strength and high electrical conductivity.The flow stress change rules and deformation behavior of the Cu-Cr-Zr-Ce alloy during hot compression deformation were investigated with isothermal compression test method by a Gleeble-1500D thermal-mechanical simulator at elevated temperature.The true stress and true strain curves were measured at the test temperature ranging from 600℃ to 800℃ and the strain rate from 0.01s-1 to 5s-1.The microstructure evolutions of Cu-Cr-Zr-Ce alloy were analyzed with an optical microscope.The results show that the curves of true stress and true strain present characteristics of typical dynamic recovery.The flow stress and the peak flow stress increase with the decrease of deforming temperature and the increase of strain rate.The higher the deforming temperature and the less the strain rate,the easier the dynamic recovery and the dynamic recrystallization taking place.On the basis of the above experimental results,the hot deformation activation energy Q was derived from the correlativity of flow stress,strain rate and temperature,respectively.And the constitutive equation of the Cu-Cr-Zr-Ce alloy was also established,which indicates the relationship among the flow stress,the strain rate and the testing temperature during the isothermal compression plastic deformation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.