article·2012-01-01Open access

Investigation into the tribological properties of a-C∶H film under different vacuum degree

Huidi Zhou

Open full text

Abstract

The a-C∶H film was deposited by unbalanced magnetron sputtering on stainless steel and silicon p(111).The fabricated a-C∶H film is homogeneously and has a high hardness,low internal stress and a good adhesion with the substrate.The tribological properties of the films under different vacuum degree(1.0×105,5.0×10-2,1.0×10-2,5.0×10-3Pa) were tested on a ball-on-disk machine.The results show that the friction coefficient of the film is decreasing but the wear rate is increasing with the increase of vacuum degree.The tribological properties of the films change dramatically under 5.0×10-3Pa,which has the lowest friction coefficient of 0.005 and an extremely short lifetime.The lifetime in high vacuum is related to the dehydrogenation and the structural transformation of the film.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.