article·2013-01-01Open access

Anionic polyurethane-acrylate dispersion prepared by in-situ surfactant-free emulsion polymerization and its strengthening mechanism for paper fiber

Long Wei

Open full text

Abstract

A facile route to prepare polyacrlate/polyurethane microemulsion(APUA) by in-situ surfactant-free emulsion polymerization was proposed.Polyurethane prepolymers(PU) were functionalized by hydroxyethyl acrylate(HEA) to obtain PU end-capped with vinyl groups,and copolymerization among vinyl-containing PU and vinyl monomers was initiated subsequently.The products were thereby utilized for the surface modification of paper.FT-IR demonstrated the copolymerization between vinyl-containing PU and polyacrylate(PA);TGA demonstrated the introduction of PA into the PU,which can delay the degradation of APUA films.The average particle size decreased from 63.33nm to 22.54nm with the increase of HEA content.Transmission electron microscope showed that APUA particles unmodified with HEA displayed as spherical morphology with heterogeneous particle size,while core-shell morphology and mono-modal distribution of particle size was detected for APUA particles modified with 4wt% HEA.However,the average particle size increased with increasing PA content,and several PA particles were simultaneously encased in PU colloidal particles.It can be also found that the folding strength of paper modified with 7wt% APUA increased when m(DMBA)=10%,m(HEA)=4%,n(NCO)/n(OH)=1.6 and m(PA)=35%.Scanning transmission electron photographs further certified that the cracks and defects on the fibers were apparently reduced,resulting in the effective improvement of the strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Material Properties and Processing · Advanced Cellulose Research Studies · Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.