Analysis on the reduction mechanism of 7022 aluminum alloy in the FSJ jointing area
Source abstract
Abstract
Experimental study was carried out on the FSJ of 10mm thick 7022 aluminum alloy.The cross-section of jointing area was analyzed by the tool microscope.The results show that the plastic metal of seam in the advancing side along the surface of the stirring pin was squeezed into the cavity clockwise and the plastic metal of seam in the retreating side along the surface of the stirring pin was squeezed into the cavity counterclockwise.In high rotation speed of the stirring head,the plastic metal soften by shaft shoulder friction stirring was generated vortex and squeezed into the cavity under the pressure of shaft shoulder.With the high speed of stirring pin,the plastic metal in the cavity squeezes the base metal to the surrounding,resulting in plastic deformation of base metal.At the same time,the part of plastic metal of the bottom was squeezed to the surface of base metal,which was squeezed to the surrounding and formed the Flash under the action of the pressure of shaft shoulder.As the vortex flow,the metal layer of the middle was concave,and the middle position of the surface of seam was sunken.Reduction effect phenomenon was occurred in the jointing area.The model of filling indirect squeeze-vortex flow can accurately express the pattern of the plastic metal of jointing area and reduction formed process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.