Preparation of hollow highly oil absorption resin with the micro-and nano-multiple structures by spray drying
Source abstract
Abstract
A novel poly(styrene-stearic methacrylate) absorption resin was prepared by spray drying technique,using dicyclopentadiene methacrylate as crosslinking agent.In this article,the effects of crosslinking agent content on oil absorption capacity and absorption rate,as well as morphological features were studied.Meanwhile,the micro appearance of the absorption resin was characterized.In addition,the comparation between spray drying and suspension polymerization on absorption performance and hydrophobic property were investigated.From scanning electron microscope(SEM) graphs,we found that the large hollow micrometer-sized spheres,prepared via spray drying,were aggregated by nanoparticles.The results showed that with the increase of crosslinking agent content,the absorption capacity for toluene and chloroform first increased then decreased,while the saturation time decreased.The absorption capacity for toluene and chloroform could reach 20.78 and 28.32g/g respectively at 3wt% crosslinking agent content,meanwhile,the saturation time for toluene was 4h.In suspension polymerization,the absorption capacity for toluene and chloroform could reach 11.26 and 24.18g/g,respectively,the saturation time was 12h.The contact angle data of the resin prepared by spray drying and suspension polymerization of water were 111.14 and 85.39°,respectively,and the surface free energy were 38.10 and 42.85mJ/m2.The resin prepared by spray drying exhibited a certain hydrophobic property.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · High voltage insulation and dielectric phenomena · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.