article·2014-01-01Open access

Preparation of electromagnetic shielding wood-based composite by electroless Ni-Cu-P plating on fraxinus mandshurica veneer

Hui Bi

Open full text

Abstract

Electromagnetic shielding wood-based composite was prepared by direct electroless Ni-Cu-P plating on fraxinus mandshurica veneer as substrate pretreated with NaBH4.The effects of NaBH4concentration,immersion time and plating time on metal deposition and surface resistivity were investigated.The morphology and structure of the composite were analyzed by using scanning electron microscopy(SEM)and X-ray diffraction(XRD).Low-resistance measuring instrument and spectrum analyzer were used for measuring surface resistivity and electromagnetic shielding effectiveness.The adhesion strength of layer was measured by vertical pulling method.The results show that the metal deposition and surface resistivity of the composite was 113g/m2 and 318mΩ/cm2,respectively,when the composite was prepared under the conditions that the substrate was treated in 3g/L NaBH4solution for 8min and plated for 25min.SEM analysis indicates that the layer deposited was uniform,continuous and compact,and the surface of the plated veneer has obvious metallic sheen.XRD analysis indicates that the layer deposited is microcrystalline state,and the adhesion strength between the layer and wood surface is very firm.The plated veneer exhibits electromagnetic shielding effectiveness around 55-60 dB in frequencies from 9kHz to 1.5GHz.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Advanced Welding Techniques Analysis · Material Selection and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.