Microstructrues and properties of superlight Mg-Li-Al wrought alloys as cold-rolling and annealing states
Source abstract
Abstract
Cold-rolling workability , heat treatment characteristics and mechanical properties of Mg-(5~22)wt%Li-2wt%Al wrought alloys were studied. Density of alloys was in the range of between 1.206 and 1.642g/cm~3. The limit of reduction for cold rolling of the β phase alloys at 16wt% and 22wt% Li exceeds 90% at room temperature. The properties and microstructures of Mg-Li-Al were studied. Alloys were cold rolled, then annealed at different temperatures. Recrystallization behaviors of the alloys were investigated through microstructures observing and hardness measuring.The results show that the cast billets were suitable for rolling after homogenizing at 573K for 12h for Mg-9Li-2Al-2Ca alloy and at 523K for 24h for Mg-9Li-2Al-2Ca alloy. The rolled plates were completely recrystallizated by annealing at 573K for 1h.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.