Microstructure and mechanical property of laser cladding Co-WC composite coatings on titanium alloy surface
Source abstract
Abstract
The Co-WC composite coatings were fabricated by laser cladding on titanium alloy TC4(Ti-6Al-4V)surface.Microstructure and mechanical property were studied by scanning electron microscope(SEM),energy dispersive spectrometer(EDS)and sclerometer.The results indicate that metallurgical combination are implemented between coatings and substrates of Co+15% WC,Co+30% WC and Co+45% WC samples,and uniformity and compact microstructure are showed without pore and cracking flaws.Cracking flaws were discovered in cladding layer of Co+60%WC sample,though metallurgical combination was realized between the coating the substrate.Macrorockwell hardness of Co-WC composite coatings were increased by 2-3times than TC4 substrate,and the value increases more obviously along with the increasing of the content of WC in alloy powder.For four cladding samples from the substrate to the surface of cladding layer,the microhardness was gradually increased,and the microhardness value of the cladding layer were nearly three times higher than TC4 substrate.Maximum content of WC added in the Co base alloy powder was 45%,when the content was higher than45%,microhardness of the cladding layer was decreased.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.