Effects of Sb content on the structure and electric property of ATO nanoparticles
Source abstract
Abstract
Using sol-gel method with the simple starting reagents of SnCl4·5H2O and SbCl3,antimony doped tin oxide(ATO) nanoparticles were synthesized.The microstructure,composition and conductivity properties were characterized by FESEM,X-ray diffraction(XRD),Fourier transform infrared spectrophotometer(FT-IR),X-ray photoelectron spectroscope(XPS) and four-probe resistivity/square resistance tester,and the effects of the Sb content on the crystalline microstructure,the crystalline size and the resistivity of the ATO nanoparticles were investigated systematically.The results show that the as-synthesized ATO was with tetragonal cassiterite crystalline structure of SnO2 and the preferred orientation was observed as(110),and its resistivity was obtained to be as lowest as 12.85Ω·cm when the Sb content was 15%.The complete doped ATO can be obtained with the Sb contents less then 28%.The conductivity of the ATO was related with the concentration of Sb5+,and there is an optimal value of Sb contents that is beneficial for Sb converting to Sb5+,and it make the carrier concentration to the maximum,so it deserves the optimum conductivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Water Quality Monitoring and Analysis · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.