The self-reconditioning effect of the phyllosilicate lubricating material on Fe-based tribopairs
Source abstract
Abstract
A phyllosilicate lubricating material was prepared using mechanical ball-milling method.The self-reconditioning effect of the as-prepared material as oil additive on Fe-based tribopairs was evaluated by employing a reciprocating friction and wear tester.The mechanisms for reducing friction and wear and self-reconditioning were discussed by characterizing the self-reconditioning layer with scanning electron microscope(SEM),energy dispersive spectroscope(EDS) and nano-hardness indenter.Results indicate the phyllosilicate powders as oil additive exhibit excellent tribological and self-reconditioning properties especially at the load of 50N and velocity of 1.0m/s.The corresponding friction coefficient and mass wear rate decrease by 49.6% and 83.3%,respectively,compared to those of the base oil.An induced continuous multi-apertured self-reconditioning oxide layer has formed on the rubbed surface with a thickness close to 1.08μm due to the complex physicochemical interactions between the additives and rubbed surfaces.The layer shows smooth and possesses high hardness,which contributes to the effective decrease in friction and wear,mainly with Fe,C,O and small content of Mg and Si.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.