article·2012-01-01Open access

Sintering and processing nanocomposite powder of Mo-8wt%Cu

Yanzhong Wang

Open full text

Abstract

Mo-8wt%Cu nano powders were fabricated by mechanical alloying,and the dense alloys were obtained via the liquid-phase sintering and post-treatment process.The microstructure of Mo-8wt%Cu alloy were investigated by scanning electron microscope(SEM),and the effects of process parameters on the density,tensile strength,the elongation and grain size were studied.The results indicate that the relative density of alloy is 98.6% after sintering at 1250℃ for 30 min,and its microstructure is composite network.The full density of Mo-Cu alloy is achieved when specimens are treated through hydrostatic extrusion transformation processes.The tensile strength is 576MPa,and the elongation is 5.8% when hydrostatic extrusion transformation degree is 40%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.