The study on the preparation for hydrophobic surface of PVDF hollow fiber membrane
Source abstract
Abstract
This paper puts forward a new method to surface hydrophobic modification of porous hydrophobic membrane.The poly(vinylidene fluoride)(PVDF) particles,in dispersion,were deposited on the PVDF hollow fiber membrane surface through ultrafiltration operation,then drying the coated membrane.The PVDF particles were firmly adhered to the membrane surface for ontology bonding effect of PVDF material.This paper optimized coating process conditions: the alcohol volume concentration was 80%;the time for pre-wash basemembrane was 120min;the drying time was 60min;the solid content of PVDF particles was 0.099%;the coating pressure was 0.050MPa;the time for coating was 30min.After coating,the contact angle increased from(83±3)° to(144±3)°.The ultrasonic processing showed good adhesion between PVDF particles and PVDF membrane.After coating,the membrane has a better anti-hydrophilic properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.