Preparation of ultra-fined Al_2O_3 slurry and its polishing properties on disk CMP
Source abstract
Abstract
Chemical-mechanical polishing(CMP) has become a widely accepted global planarization technology.Slurry is one of the key elements during CMP process.In the present work,a CMP slurry containing ultra-fined Al_2O_3 particles was prepared.Mastersizer instrument shows the average diameter of the prepared Al_2O_3 particles was about 0.5 μm and SEM shows the shape of which was erose.Then its CMP properties on hard disk substrate with nickel-phosphorous plated was studied.Results indicated that the average roughness(R_a) and the waviness(W_a) of the polished surfaces as well as material removal rate were much dependent on the contents of Al_2O_3 particles and oxidant oxidizer in the prepared slurry.AFM analysis shows that,compared with the very uneven surface before CMP,a smooth surface was obtained after polishing in the slurry containing 7% Al_2O_3 particles and 2% oxidant.Further,the polished surface was analyzed by using auger electron spectrogram(AES) and X-ray photoelectron spectroscopy(XPS).It was found that,an oxidization reaction,namely the oxidization of nickle,occurred within the external layer of disk surface after CMP process,and oxidized product was Ni(OH)_2.Finally,the CMP mechanism of disk substrate in the Al_2O_3 prepared slurry was deduced preliminarily.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.