journal article·2024-08-26Open access

Effect of Photoaging on the Structure, Optical Properties and Roughness of One-Shade Composite Restoratives

Aikaterini Petropoulou, Maria Dimitriadi, Spiros Zinelis, Maria Antoniadou, George Eliades

Abstract

The aim of the study was to evaluate changes in the degree of C=C conversion (DC%), chemical structure, optical properties and roughness of one-shade composites before/after photoaging. Τhe one-shade materials tested were Charisma Topaz One (CHT), Clearfil Majesty ES-2 Universal (MES), Essentia Universal (ESU) and Omnichroma (OMN), with G-aenial Anterior (CNA) serving as control. Specimens (2 mm thickness) were prepared and tested for DC% and chemical structure (ATR–FTIR spectroscopy), optical properties (L*a*b*–ΔΕ, translucency parameter–TP, opalescence parameter–OP, contrast ratio–CR and total transmittance–TT by UV–Vis spectroscopy) and roughness (Sa, Sz, Sdr, Sds and Sc by optical profilometry) before and after photoaging (Xe-arc weatherometer). Significant differences were found in DC% between top–bottom surfaces (ESU, OMN before; ESU, CNA after). Photoaging improved DC%, reduced ester peaks implying photodegradation, reduced L* (CHT, OMN, CNA), a* (CHT, CNA), b* (OMN, CNA), TP (all, except for MES), OP (only MES), CR (only MES, but an increase in CNA) and TT (CHT, OMN). OMN, CNA and MES demonstrated ΔΕ > 3.3. Photoaging significantly increased all roughness parameters in all materials, except for MES (Sz, Sdr, Sc) and OMN (Sdr). Although listed in the same group, significant differences were found in one-shade composites before and after photoaging. Several products were strongly affected by photoaging, demonstrating evidence of photodegradation, an increased roughness and color changes exceeding the clinically acceptable levels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Photopolymerization techniques and applications · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Fixed Prosthodontics, School of Dentistry, National and Kapodistrian University of Athens, 2 Thivon Str., 11527 Athens, Greece

Department of Biomaterials, School of Dentistry, National and Kapodistrian University of Athens, 2 Thivon Str., 11527 Athens, Greece

Department of Operative Dentistry, School of Dentistry, National and Kapodistrian University of Athens, 2 Thivon Str., 11527 Athens, Greece

References (56)

Show source-provided references
1. Voids and Interlayer Gaps in Class 1 Posterior Composite Restorations: A Comparison between a Microlayer and a 2-Layer Technique
2. Smart Monochromatic Composite: A Literature Review10.1155/2022/2445394 ↗
3. AlHamdan, E.M., Bashiri, A., Alnashmi, F., Al-Saleh, S., Al-shahrani, K., Al-shahrani, S., Alsharani, A., Alzahrani, K.M., Alqarawi, F.K., and Vohra, F. (2021). Evaluation of smart chromatic technology for a single-shade dental polymer resin: An in vitro study. Appl. Sci. Switz., 11.10.3390/app112110108 ↗
4. Prodan, C.M., Gasparik, C., Ruiz-López, J., and Dudea, D. (2023). Color and Translucency Variation of a One-Shaded Resin-Based Composite after Repeated Heating Cycles and Staining. Mater. Basel Switz., 16.10.3390/ma16103793 ↗
5. (2024, March 24). Omnichroma Technical Report, Tokuyama Corp., Tokyo. Available online: https://omnichroma.com/us/wp-content/uploads/sites/4/2019/01/OMNI-Tech-Report-Color-Final.pdf.
6. Analysis of the Color Matching of Universal Resin Composites in Anterior Restorations10.1111/jerd.12659 ↗
7. Long-Term Mechanical Stability and Light Transmission Characteristics of One Shade Resin-Based Composites10.1016/j.jdent.2021.103915 ↗
8. Ilie, N. (2022). Universal Chromatic Resin-Based Composites: Aging Behavior Quantified by Quasi-Static and Viscoelastic Behavior Analysis. Bioengineering, 9.10.3390/bioengineering9070270 ↗
9. The Effect of Food-Simulating Liquids on Surface Features of Single-Shade Universal Composites: An In Vitro Study10.4103/jispcd.JISPCD_233_22 ↗
10. Yılmaz Atalı, P., Doğu Kaya, B., Manav Özen, A., Tarçın, B., Şenol, A.A., Tüter Bayraktar, E., Korkut, B., Bilgin Göçmen, G., Tağtekin, D., and Türkmen, C. (2022). Assessment of Micro-Hardness, Degree of Conversion, and Flexural Strength for Single-Shade Universal Resin Composites. Polymers, 14.10.3390/polym14224987 ↗
11. Color, Lightness, Chroma, Hue, and Translucency Adjustment Potential of Resin Composites Using CIEDE2000 Color Difference Formula10.1111/jerd.12689 ↗
12. Evaluation of Shade Matching in the Repair of Indirect Restorative Materials with Universal Shade Composites10.26650/eor.20231076495 ↗
13. Color Adjustment Potential of Single-Shade Resin Composite to Various-Shade Human Teeth: Effect of Structural Color Phenomenon10.4012/dmj.2020-364 ↗
14. Optical Behavior of One-Shaded Resin-Based Composites10.1016/j.dental.2021.02.011 ↗
15. Instrumental and Visual Evaluation of the Color Adjustment Potential of Resin Composites10.1111/jerd.12488 ↗
16. El-Rashidy, A.A., Abdelraouf, R.M., and Habib, N.A. (2022). Effect of Two Artificial Aging Protocols on Color and Gloss of Single-Shade versus Multi-Shade Resin Composites. BMC Oral Health, 22.10.1186/s12903-022-02351-7 ↗
17. Alshehri, A., Alhalabi, F., Mustafa, M., Awad, M.M., Alqhtani, M., Almutairi, M., Alhijab, F., Jurado, C.A., Fischer, N.G., and Nurrohman, H. (2022). Effects of Accelerated Aging on Color Stability and Surface Roughness of a Biomimetic Composite: An In Vitro Study. Biomim. Basel Switz., 7.10.3390/biomimetics7040158 ↗
18. Effect of Aging and Bleaching on the Color Stability and Surface Roughness of a Recently Introduced Single-Shade Composite Resin10.1016/j.jdent.2024.104917 ↗
19. Accelerated Aging Effects on Color Stability of Potentially Color Adjusting Resin-Based Composites10.2341/20-099-L ↗
20. Influence of Surface Roughness of Universal Shade Resin Composites on Color Adjustment Potential10.4012/dmj.2023-007 ↗
21. Comparison of Surface Properties of Universal Shade and Conventional Resin-Based Composites after Degradation and Repolishing
22. Effect of Photostabilizers on the Rate of Photodegradation of Polymethylmethacrylat10.1016/0014-3057(74)90179-7 ↗
23. Cohen, D.K. (2023). Glossary of Surface Texture Parameters, Michigan Metrology LLC.
24. Vattanaseangsiri, T., Khawpongampai, A., Sittipholvanichkul, P., Jittapiromsak, N., Posritong, S., and Wayakanon, K. (2022). Influence of Restorative Material Translucency on the Chameleon Effect. Sci. Rep., 12.10.1038/s41598-022-12983-y ↗
25. Translucency, Opalescence and Light Transmission Characteristics of Light-Cured Resin Composites10.1016/j.dental.2010.07.009 ↗
26. Synthesis, characterization, and properties of petroleum-based methacrylate polymers derived from tricyclodecane for microelectronics and optoelectronics applications10.1016/j.jiec.2017.04.019 ↗
27. Odian, G. (2004). Principles of Polymerization, Wiley-Interscience. [4th ed.].10.1002/047147875X ↗
28. Dynamic Monitoring of Refractive Index Change through Photoactive Resins10.1016/j.dental.2010.07.011 ↗
29. Ceramic pigments for digital decoration inks: An overview
30. Surface Hardness Development in Light-Cured Composites
31. Fink, J.K. (2018). 9—Acrylic Resins. Reactive Polymers: Fundamentals and Applications, Plastics Design Library; William Andrew Publishing. [3rd ed.].10.1016/B978-0-12-814509-8.00009-9 ↗
32. Stability of Radicals in Cured Composite Materials10.1016/0109-5641(93)90064-W ↗
33. A Review on Photochemical Effects of Common Plastics and Their Related Applications10.1002/pol.20230322 ↗
34. Color: An Important but Overlooked Factor for Plastic Photoaging and Microplastic Formation10.1021/acs.est.2c02402 ↗
35. Barszczewska-Rybarek, I.M. (2019). A Guide through the Dental Dimethacrylate Polymer Network Structural Characterization and Interpretation of Physico-Mechanical Properties. Materials, 12.10.3390/ma12244057 ↗
36. Changes on Transmittance Mode of Different Composite Resins10.1590/S1516-14392009000200003 ↗
37. How Filler Properties, Filler Fraction, Sample Thickness and Light Source Affect Light Attenuation in Particulate Filled Resin Composites10.1016/j.dental.2005.01.002 ↗
38. Measurement of Opalescence of Resin Composites10.1016/j.dental.2005.03.015 ↗
39. Fluorescence and Opalescence of Two Dental Composite Resins10.1055/s-0039-1696899 ↗
40. Color and Contrast Ratio of Resin Composites for Whitened Teeth10.1016/j.jdent.2009.05.005 ↗
41. Color Stability of Modern Composites Subjected to Different Periods of Accelerated Artificial Aging10.1590/S0103-64402012000500018 ↗
42. Color Stability and Degree of Cure of Direct Composite Restoratives after Accelerated Aging10.2341/06-127 ↗
43. Colour-Stability and Gloss-Retention of Silorane and Dimethacrylate Composites with Accelerated Aging10.1016/j.jdent.2008.08.001 ↗
44. Color Stability and Polymerization Behavior of Direct Esthetic Restorations10.1111/jerd.12113 ↗
45. Fluorescence Intensity of Resin Composites and Dental Tissues before and after Accelerated Aging: A Comparative Study10.2341/07-74 ↗
46. Colour Stability of Veneering Composites after Accelerated Aging10.1055/s-0039-1697821 ↗
47. Color Stability of Resin Matrix Restorative Materials as a Function of the Method of Light Activation10.1111/j.1600-0722.2004.00125.x ↗
48. Color Stability of Resin Cements Exposed to Aging10.2341/18-064-L ↗
49. Colour Stability of Laminate Veneers: An in Vitro Study10.1016/j.jdent.2011.11.006 ↗
50. Perceptibility and Acceptability Thresholds for Colour Differences in Dentistry10.1016/j.jdent.2013.11.017 ↗
51. Effect of Surface Roughness on Stain Resistance of Dental Resin Composites10.1111/j.1708-8240.2005.tb00094.x ↗
52. Comparison of the CIELab and CIEDE 2000 Color Difference Formulas on Gingival Color Space10.1111/jopr.12717 ↗
53. Comparison of Surface Layer Properties of Composite Resins by ESCA, SEM and X-ray Diffractometry10.1016/0142-9612(84)90074-7 ↗
54. Surface Sealant Effect on the Color Stability of a Composite Resin Following Ultraviolet Light Artificial Aging10.2341/18-053-L ↗
55. Effect of Different In Vitro Aging Methods on Color Stability of a Dental Resin-Based Composite Using CIELAB and CIEDE2000 Color-Difference Formulas10.1111/jerd.12155 ↗
56. Color Stability of Resin Cements after Accelerated Aging