Performance of Austenitic High-Nitrogen Steels under Gross Slip Fretting Corrosion in Bovine Serum
Source abstract
Abstract
Modular artificial hip joints are a clinical standard today. However, the release of wear products from the head–taper interface, which includes wear particles in the nm size range, as well as metal ions, have raised concerns. Depending on the loading of such taper joints, a wide variety of different mechanisms have been found by retrieval analyses. From these, this paper concentrates on analyzing the contribution of gross slip fretting corrosion at ultra-mild wear rates using a bovine calf serum solution (BCS) as the lubricant. The parameters were chosen based on biomechanical considerations, producing wear rates of some ng/m wear path. In parallel, the evolution of tribomaterial (third bodies) was analyzed as to its constituents and generation rates. It has already been shown earlier that, by an advantageous combination of wear mechanisms and submechanisms, certain constituents of the tribomaterial remain inside the contact area and act like extreme-pressure lubricant additives. For the known wear and corrosion resistance of austenitic high-nitrogen steels (AHNSs), which outperform CoCrMo alloys even under inflammatory conditions, we hypothesized that such steels will generate ultra-mild wear rates under gross slip fretting. While testing AHNSs against commercially available biomedical-grade materials of CoCrMo and TiAlV alloys, as well as zirconia-toughened alumina (ZTA) and against itself, it was found that AHNSs in combination with a Ti6Al4V alloy generated the smallest wear rate under gross slip fretting corrosion. This paper then discusses the wear behavior on the basis of ex situ analyses of the worn surfaces as to the acting wear mechanisms and submechanisms, as well as to the tribological reaction products.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Mechanical stress and fatigue analysis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Max Planck Institute for Sustainable Materials, Microstructure Physics and Alloy Design, 40237 Duesseldorf, Germany
Department of Orthopedic Surgery, Rush University Medical Center, Chicago, IL 60612, USA
Laboratoire de Géologie, Université de Lyon, 69342 Lyon, France
Department of Physics, TU Dortmund University, 44227 Dortmund, Germany
Funding
Galante Family Foundation, Niles, IL, US · Grainger Chair of the Arthritis and Orthopedics Institute, Chicago, IL, US · AlCove Management GmbH, Essen, Germany
References (82)
Show source-provided references
1. Rates of Total Joint Replacement in the United States: Future Projections to 2020–2040 Using the National Inpatient Sample10.3899/jrheum.170990 ↗
2. Clinical impact of trunnion wear after total hip arthroplasty10.2106/JBJS.RVW.15.00096 ↗
3. Trunnionosis in total hip arthroplasty: A review10.1007/s10195-016-0391-1 ↗
4. There is no significant difference in fretting and corrosion at the trunnion of metal and ceramic heads10.3928/01477447-20181206-03 ↗
5. In vivo corrosion of modular hip prosthesis components in mixed and similar metal combinations. The effect of crevice, stress, motion, and alloy coupling10.1002/jbm.820271210 ↗
6. Migration of corrosion products from modular hip prostheses. Particle microanalysis and histopathological findings10.2106/00004623-199409000-00009 ↗
7. Local and distant products from modularity
8. A multicenter retrieval study of the taper interfaces of modular hip prostheses10.1097/00003086-200208000-00018 ↗
9. What are the current clinical issues in wear and tribocorrosion?10.1007/s11999-014-3610-1 ↗
10. Greenwald, A.S., Kurtz, S.M., and Lemons, J.E. (2015). Modularity and Tapers in Total Joint Replacement Devices, ASTM STP 1591, ASTM International.10.1520/STP1591-EB ↗
11. Allergies in orthopaedic and trauma surgery10.1016/j.otsr.2016.06.021 ↗
12. Allergy to Surgical Implants10.1007/s12016-018-8707-y ↗
13. In-vitro fretting corrosion testing of modular hip implants
14. Couple corrosion among alloys for skeletal prostheses10.1002/jbm.820080609 ↗
15. Evaluation of couple/crevice corrosion by prosthetic alloys under in vivo conditions10.1002/jbm.820120605 ↗
16. Mechanical, chemical and biological damage modes within head-neck tapers of CoCrMo and Ti6Al4V contemporary hip replacements10.1002/jbm.b.33972 ↗
17. Degradation Modes of CoCrMo and Ti6Al4VAlloys in Modular Head-Neck Junctions of Retrieved Hip Prostheses
18. Fischer, A., Fullam, S., Telouk, P., and Wimmer, M.A. (2021). The mechanism-based approach of understanding run-in and steady state: A gross-slip fretting experiment to fathom tribocorrosion of total hip taper junctions. Biotribology, 25.10.1016/j.biotri.2021.100165 ↗
19. Fretting: Load carrying capacity of wear debris10.1115/1.3260881 ↗
20. Velocity accommodation in fretting10.1016/0043-1648(88)90191-3 ↗
21. Wear modeling and the third body concept10.1016/j.wear.2006.10.011 ↗
22. The role of vorticity in the formation of tribomaterial during sliding
23. The evolution of tribomaterial during sliding: A brief introduction10.1007/s11249-009-9498-3 ↗
24. Early deformation mechanisms in the shear affected region underneath a copper sliding contact10.1038/s41467-020-14640-2 ↗
25. Solids Under Extreme Shear: Friction-Mediated Subsurface Structural Transformations10.1002/adma.201806705 ↗
26. Chronology of the microstructure evolution for pearlitic steel under unidirectional tribological loading10.1016/j.triboint.2016.06.016 ↗
27. In-situ Generated Tribomaterial in Metal/Metal Contact: Current understanding and future implications for implants10.1016/j.biotri.2017.03.006 ↗
28. Dienwiebel, M., and de Barros, M.-I. (2018). Triboanalytics, Springer.
29. Chung, Y.W., Dunand, D.C., Liaw, P., and Olson, G.B. (1999). Advanced Materials in the 21st Century: The 1999 Julia R. Weertman Symposium, The Minerals, Metals & Materials Society.
30. Zum Gahr, K.H. (1987). Microstructure and Wear of Materials, Elsevier Science Publishers.
31. Atomic Scale Origin of Metal Ion Release from Hip Implant Taper Junctions10.1002/advs.201903008 ↗
32. Wear-accelerated corrosion of passive metals in tribocorrosion systems10.1149/1.1838341 ↗
33. The Influence of Molybdenum on the Fretting Corrosion Behavior of CoCr/TiAlV Couples10.1016/j.biotri.2017.01.001 ↗
34. Fischer, A., Telouk, P., and Wimmer, M.A. (2023). The gross slip fretting corrosion mechanisms of biomedical ceramic-metal couples. Biotribology, 35.10.1016/j.biotri.2023.100252 ↗
35. Fretting-corrosion of CoCr-alloys against TiAl6V4: The importance of molybdenum in oxidative biological environments10.1016/j.wear.2021.203813 ↗
36. The third-body approach: A mechanical view of wear10.1016/0043-1648(84)90025-5 ↗
37. Does Surface Topography Play a Role in Taper Damage in Head-neck Modular Junctions?10.1007/s11999-016-4933-x ↗
38. Topography rules the ultra-mild wear regime under boundary lubricated gross-slip fretting corrosion10.1016/j.wear.2023.204716 ↗
39. Degradation phenomena occurring in the conical taper of a short-term retrieved ZTA femoral head: A case study10.1016/j.matdes.2018.07.056 ↗
40. Pu, J., Wu, D., Zhang, Y., Zhang, X., and Jin, Z. (2021). An Experimental Study on the Fretting Corrosion Behaviours of Three Material Pairs at Modular Interfaces for Hip Joint Implants. Lubricants, 9.10.3390/lubricants9020012 ↗
41. Reducing fretting-initiated crevice corrosion in hip simulator tests using a zirconia-toughened alumina femoral head10.1002/jbm.b.34062 ↗
42. Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion10.1007/s11999-015-4683-1 ↗
43. Kwon, Y.-M., Xia, Z., Glyn-Jones, S., Beard, D., Gill, H.S., and Murray, D.W. (2009). Dose-dependent cytotoxicity of clinically relevant cobalt nanoparticles and ions on macrophages in vitro. Biomed. Mater., 4.10.1088/1748-6041/4/2/025018 ↗
44. Adverse reaction to metal debris following hip resurfacing: The influence of component type, orientation and volumetric wear10.1302/0301-620X.93B2.25099 ↗
45. Toxicity of cobalt–chromium nanoparticles released from a resurfacing hip implant and cobalt ions on primary human lymphocytes in vitro10.1002/jat.3100 ↗
46. In vitro analyses of the toxicity, immunological, and gene expression effects of cobalt-chromium alloy wear debris and Co ions derived from metal-on-metal hip implants10.3390/lubricants3030539 ↗
47. Biocompatibility of a nickel-free austenitic steel assayed by osteoblastic MC3T3-E1 cells10.1002/mawe.200290010 ↗
48. A new austenitic stainless steel with negligible nickel content: An in vitro and in vivo comparative investigation10.1016/S0142-9612(03)00416-2 ↗
49. Biomaterials in orthopedic surgery: Effects of a nickel-reduced stainless steel on in vitro proliferation and activation of human osteoblasts10.1177/039139880302601013 ↗
50. Osteoinduction and long-term osseointegration promoted by combined effects of nitrogen and manganese elements in high nitrogen nickel-free stainless steel10.1039/C5TB02190A ↗
51. Corrosion resistance of the nickel-free high-nitrogen steel FeCrMnMoN0.9 under simulated inflammatory conditions10.1002/jbm.b.34754 ↗
52. Becerikli, M., Jaurich, H., Wallner, C., Wagner, J.M., Dadras, M., Jettkant, B., Pöhl, F., Seifert, M., Jung, O., and Mitevski, B. (2019). P2000—A high-nitrogen austenitic steel for application in bone surgery. PLoS ONE, 14.10.1371/journal.pone.0214384 ↗
53. In-vivo comparison of the Ni-free steel X13CrMnMoN18-14-3 and titanium alloy implants in rabbit femora—A promising steel for orthopedic surgery10.1002/jbm.b.34745 ↗
54. Nickel-free high-nitrogen austenitic steel outperforms CoCrMo alloy regarding tribocorrosion in simulated inflammatory synovial fluids10.1002/jor.25174 ↗
55. Mendes, G., and Lago, B. (2009). Strength of Materials, Nova Science Publishers Inc.. Materials Science and Technologies Series.
56. Analysis of sliding behaviour for fretting loadings: Determination of transition criteria10.1016/0043-1648(94)06582-9 ↗
57. Browne, J., Gioe, T., and Weitzman, D. (2019). AAOS-AJRR, Annual Report 2019, AAOS.
58. Indication of worn WC/C surface locations of a dry-running twin-screw rotor by the oxygen incorporation in tungsten-related Raman modes10.1063/1.4966145 ↗
59. Über die Berührung fester elastischer Körper und über die Härte
60. On the Repassivation Behavior of High-Purity Titanium and Selected α, β, and β+ α Titanium Alloys in Aqueous Chloride Solutions10.1149/1.1836914 ↗
61. Limitations of potentiostatic repassivation techniques and their relationship to the applicability of the high field approximation to the repassivation of titanium10.1149/1.2044272 ↗
62. Graphitic Tribological Layers in Metal-on-Metal Hip Replacements10.1126/science.1213902 ↗
63. Wittrock, A., Heermant, S., Beckmann, C., Fischer, A., Wimmer, M.A., and Debus, J. (2024). Molecular-Structural Changes in the Organic-Inorganic Tribological Material at Hip Taper Junctions. Adv. Healthc. Mater., to be submitted.
64. Third-bodies in tribology10.1016/0043-1648(90)90070-Q ↗
65. Wear by hard particles10.1016/S0301-679X(98)00079-6 ↗
66. Understanding and modelling wear rates and mechanisms in fretting via the concept of rate-determining processes—Contact oxygenation, debris formation and debris ejection10.1016/j.wear.2021.204066 ↗
67. Modeling contact size effect on fretting wear: A combined contact oxygenation—Third body approach10.1016/j.wear.2021.204168 ↗
68. Wear mechanisms in metal-on-metal bearings: The importance of tribochemical reaction layers
69. Self-Protection of High Wear Materials10.1080/05698197908982902 ↗
70. Nano-scale wear characterization of CoCrMo biomedical alloys
71. Molecular dynamics simulations of sliding in an Fe-Cu tribopair system10.1016/j.wear.2009.01.032 ↗
72. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
73. Kleff, J. (1994). Warmritzen Metallischer Werkstoffe, VDI-Verlag.
74. High Strain Behaviour of Ultrafine-grained Aluminium Alloys Processed through the Severe Plastic Deformation Techniques: A Review10.1007/s13632-022-00891-6 ↗
75. Three Regimes in the Tribo-Oxidation of High Purity Copper at Temperatures of up to 150 °C10.1002/adem.202200518 ↗
76. Tribologically induced crystal rotation kinematics revealed by electron backscatter diffraction10.1016/j.actamat.2021.117566 ↗
77. Influence of molybdate ion and pH on the fretting corrosion of a CoCrMo—Titanium alloy couple10.1016/j.biotri.2017.05.002 ↗
78. Investigation of the role of tribofilms in self-mating CoCrMo systems utilizing a quartz crystal microtribometer10.1016/j.triboint.2013.12.015 ↗
79. Pourzal, R. (2011). Possible Pathways of Particle Formation in CoCrMo Sliding Wear. [Ph.D. Thesis, University Duisburg-Essen, VDI Verlag].
80. Micro-and nano-scale tribo-corrosion of cast CoCrMo10.1007/s11249-011-9757-y ↗
81. Van Citters, D.W., Martin, A.J., Currier, J.H., Park, S.H., and Edidin, A.A. (2015). Modularity and Tapers in Total Joint Replacement Devices, STP1591, ASTM International.
82. What Factors Drive Taper Corrosion?10.1016/j.arth.2018.03.055 ↗