journal article·2023-07-07Open access

Alveolar Bone Microstructure Surrounding Orthodontic Anchor Screws with Plasma Surface Treatment in Rats

Keisuke Okawa, Satoru Matsunaga, Norio Kasahara, Masaaki Kasahara, Chie Tachiki, Takayoshi Nakano, Shinichi Abe, Yasushi Nishii

Abstract

A lateral load was applied to anchor screws that had undergone surface treatment, and the structure, cellular dynamics, and quality of the bone surrounding anchor screws were analyzed to investigate the effect of this surface treatment on the peri-implant jawbone. In addition, bone microstructural characteristics were quantitatively evaluated for each site of loading on the bone around the anchor screw. Rats were euthanized after observation on days 3, 5, or 7, and bone quality analyses were performed. Bone–implant contact rate increased more rapidly at an early stage in the treated surface group than in the untreated surface group. Bone lacuna morphometry showed that the measured values adjacent to the screw at the screw neck on the compressed side (A) and at the screw tip on the uncompressed side (D) were significantly lower than those at the screw tip on the compressed side (B) and at the screw neck on the uncompressed side (C). Collagen fiber bundle diameter showed that the measured values adjacent to regions A and D were significantly higher than those at regions B and C. Anchor screw surface activation facilitates initial bone contact of the screw, suggesting that early loading may be possible in clinical practice.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthodontics and Dentofacial Orthopedics · Dental Implant Techniques and Outcomes · Facial Trauma and Fracture Management

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Orthodontics, Tokyo Dental College, 2-9-18 Kandamisaki-cho, Chiyoda-ku, Tokyo 101-0061, Japan

Oral Health Science Center, Tokyo Dental College, 2-9-18 Kandamisaki-cho, Chiyoda-ku, Tokyo 101-0061, Japan

Department of Anatomy, Tokyo Dental College, 2-9-18 Kandamisaki-cho, Chiyoda-ku, Tokyo 101-0061, Japan

Department of Histology and Developmental Biology, Tokyo Dental College, 2-9-18 Kandamisaki-cho, Chiyoda-ku, Tokyo 101-0061, Japan

Department of Dental Materials Science, Tokyo Dental College, 2-9-18 Kandamisaki-cho, Chiyoda-ku, Tokyo 101-0061, Japan

Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, 2-1, Yamadaoka, Suita 565-0871, Japan

References (33)

Show source-provided references
1. Comparison of anchorage efficiency of orthodontic mini-implant and conventional anchorage reinforcement in patients requiring maximum orthodontic anchorage: A systematic review and meta-analysis10.1016/j.jebdp.2020.101401 ↗
2. Clinical effectiveness of orthodontic miniscrew implants: A meta-analysis10.1177/0022034511409236 ↗
3. Class II malocclusion treated with miniscrew anchorage: Comparison with traditional orthodontic mechanics outcomes10.1016/j.ajodo.2007.03.038 ↗
4. Maxillary molar distalization with miniscrew-supported appliances in Class II malocclusion: A systematic review10.2319/091717-624.1 ↗
5. Nonsurgical correction of a Class III skeletal anterior open-bite malocclusion using multiple microscrew implants and digital profile prediction10.1016/j.ajodo.2017.03.031 ↗
6. Mini-implants in orthodontics: A systematic review of the literature10.1016/j.ajodo.2008.09.026 ↗
7. Indications for immediate loading of implants and implant success10.1111/j.1600-0501.2006.01348.x ↗
8. Miniscrews failure rate in orthodontics: Systematic review and meta-analysis10.1093/ejo/cjx093 ↗
9. An umbrella review of the effectiveness of temporary anchorage devices and the factors that contribute to their success or failure10.1016/j.jebdp.2020.101402 ↗
10. Resistance to immediate orthodontic loading of surface-treated mini-implants10.2319/030309-123.1 ↗
11. Early osseointegration to hydrophilic and hydrophobic implant surfaces in humans10.1111/j.1600-0501.2011.02172.x ↗
12. Bioactive scaffold (sodium alginate)-g-(nHAp@SiO2@GO) for bone tissue engineering10.1016/j.ijbiomac.2022.09.153 ↗
13. Future prospects for bio-functionalized implants
14. Evaluation of success rate and biomechanical stability of ultraviolet-photofunctionalized miniscrews with short lengths10.1016/j.ajodo.2019.12.018 ↗
15. Plasma treatment maintains surface energy of the implant surface and enhances osseointegration10.1155/2013/354125 ↗
16. NIH Consensus Development Panel on Osteoporosis Prevention, Diagnosis, and Therapy (2000). Osteoporosis prevention, diagnosis, and therapy. NIH Consens. Statement, 17, 1–45.
17. NIH Consensus Development Panel on Osteoporosis Prevention, Diagnosis, and Therapy (2001). Osteoporosis prevention, diagnosis, and therapy. JAMA, 285, 785–795.10.1001/jama.285.6.785 ↗
18. Unique alignment and texture of biological apatite crystallites in typical calcified tissues analyzed by microbeam X-ray diffractometer system10.1016/S8756-3282(02)00850-5 ↗
19. Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographic study in monkeys10.1034/j.1600-0501.1996.070208.x ↗
20. Factors affecting the clinical success of screw implants used as orthodontic anchorage10.1016/j.ajodo.2004.11.032 ↗
21. Evaluation of the microstructural characteristics of bone surrounding anchor screws placed under a horizontal load by exploring the orientation of biological apatite crystals and collagen fiber anisotropy10.2485/jhtb.31.79 ↗
22. The effect of cortical bone thickness on the stability of orthodontic mini-implants and on the stress distribution in surrounding bone10.1016/j.ijom.2008.09.006 ↗
23. Comparison of rate of canine retraction and anchorage potential between mini-implant and conventional molar anchorage: An in vivo study10.4103/ccd.ccd_837_17 ↗
24. Comparison of the anchorage value of the first molars supported with implant and first molars supported with second molar during en masse retraction10.4103/jispcd.JISPCD_262_19 ↗
25. Effectiveness of methods for detaching orthodontic implants likely to fracture upon rotational torque—An animal study10.1002/cre2.20 ↗
26. Placement and removal torque values of orthodontic miniscrew implants10.1016/j.ajodo.2010.11.017 ↗
27. Removal torque values of surface-treated mini-implants after loading10.1016/j.ajodo.2006.07.038 ↗
28. Implantation of hydrophilic and hydrophobic titanium discs in rat tibia: Cellular reactions on the surfaces during the first 3 weeks in bone10.1016/j.biomaterials.2003.12.006 ↗
29. Altering the cellular mechanical force balance results in integrated changes in cell, cytoskeletal and nuclear shape10.1242/jcs.103.4.1215 ↗
30. Finite element analysis of miniscrew implants used for orthodontic anchorage10.1016/j.ajodo.2011.11.012 ↗
31. The relative effects of collagen fiber orientation, porosity, density, and mineralization on bone strength10.1016/0021-9290(89)90202-9 ↗
32. Biological apatite (BAp) crystallographic orientation and texture as a new index for assessing the microstructure and function of bone regenerated by tissue engineering10.1016/j.bone.2012.07.003 ↗
33. Optimal force magnitude loaded to orthodontic microimplants: A finite element analysis10.2319/031115-153.1 ↗