Properties of vacuum plate glass for sealing
Source abstract
Abstract
According to the characteristics of lower sealing temperature of the vacuum plate glass and coefficient of thermal expansion of phase match between the glass and the sealing solder,the experiment selected the sealing solder of the PbO-TiO2-SiO2-RxOysystem.The edges of the vacuum plate glass were sealed with welding process under vacuum.The microstructure and phase composition of sealing edges of the vacuum plate glass were analyzed for EBSD,EDS and XRD.The associative property and stability at the interfaces between the sealing layer and the glass were studied.And the sealing solder of the vacuum plate glass was experimented with shear strength and air tightness,and measured shear performance and airtight performance.Sealing mechanism of the vacuum plate glass was explored.The results show that the interface between the glass and the sealing solder was clear,related closely and sealing effect was well.The sealing layer divides into the wetting layer for reacting with the interface and the melting layer,and the thickness was 7-9μm and 180-190μm respectively.The interface appears element migration.The wetting layer for reacting with the interface creates few PbTiO3.The sealing layer barely exists obvious cracks and exists few disconnected pore,but not affect its airtight performance.Air tightness of the sealing solder reaches 1.0×10-9 Pa·m3/s.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.