Mechanical Consequences of Dynamically Loaded NiTi Wires under Typical Actuator Conditions in Rehabilitation and Neuroscience
Source abstract
Abstract
In the field of rehabilitation and neuroscience, shape memory alloys play a crucial role as lightweight actuators. Devices are exploiting the shape memory effect by transforming heat into mechanical work. In rehabilitation applications, dynamic loading of the respective device occurs, which in turn influences the mechanical consequences of the phase transforming alloy. Hence in this work, dynamic thermomechanical material behavior of temperature-triggered phase transforming NiTi shape memory alloy (SMA) wires with different chemical compositions and geometries was experimentally investigated. Storage modulus and mechanical loss factor of NiTi alloys at different temperatures and loading frequencies were analyzed under force-controlled conditions. Counterintuitive storage modulus- and loss factor-dependent trends regarding the loading frequency dependency of the mechanical properties on the materials’ composition and geometry were, hence, obtained. It was revealed that loss factors showed a pronounced loading frequency dependency, whereas the storage modulus was not affected. It was shown that force-controlled conditions led to a lower storage modulus than expected. Furthermore, it turned out that a simple empirical relation could capture the characteristic temperature dependency of the storage modulus, which is an important input relation for modeling the rehabilitation device behavior under different dynamic and temperature loading conditions, taking directly into account the material behavior of the shape memory alloy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Thermoelastic and Magnetoelastic Phenomena · Musicians’ Health and Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Polymer Product Engineering, Faculty of Engineering & Natural Sciences, Johannes Kepler University Linz, Altenbergerstrasse 69, 4040 Linz, Austria
Chair of Technical Thermodynamics and Energy Efficient Material Treatment, Institute of Energy Process Engineering and Fuel Technology, Clausthal University of Technology, Agricolastrasse 4, 38678 Clausthal-Zellerfeld, Germany
Funding
European Regional Development Fund (ERDF) and the State Government of Upper Austria
References (48)
Show source-provided references
1. Pittacio, S., and Viscuso, S. (2012). Shape Memory Actuators for Medical Rehabilitation and Neuroscience. Smart Actuation and Sensing Systems-Recent Advances and Future Challenges, IntechOpen.10.5772/50201 ↗
2. Treadmill training with partial body weight support after stroke: A review
3. Krebs, H., Rossi, S., Kim, S., Artemiadis, P., Williams, D., Castelli, E., and Cappa, P. (2011). Pediatric anklebot. IEEE Int. Conf. Rehabil. Robot, 1–5.10.1109/ICORR.2011.5975410 ↗
4. MEG-compatible force sensor10.1016/j.jneumeth.2004.11.004 ↗
5. Neuromagnetic activation of primary and secondary somatosensory cortex following tactile-on and tactile-off stimulation10.1016/j.clinph.2009.12.022 ↗
6. Brain activity during stepping: A novel MRI-compatible device10.1016/j.jneumeth.2011.07.022 ↗
7. Shape Memory Alloys10.1038/scientificamerican1179-74 ↗
8. Improving the damping behavior of fiber-reinforced polymer composites with embedded superelastic shape memory alloys (SMA)10.1088/1361-665X/ab6026 ↗
9. Nascimento, M., Inácio, P., Paixão, T., Camacho, E., Novais, S., Santos, T.G., Fernandes, F.M.B., and Pinto, J.L. (2020). Embedded Fiber Sensors to Monitor Temperature and Strain of Polymeric Parts Fabricated by Additive Manufacturing and Reinforced with NiTi Wires. Sensors, 20.10.3390/s20041122 ↗
10. A Smart Polymer Composite Based on a NiTi Ribbon and a Magnetic Hybrid Material for Actuators with Multiphysic Transduction10.3390/act4040301 ↗
11. Temperature memory effect of a nickel–titanium shape memory alloy10.1063/1.1637958 ↗
12. Bhattacharya, K. (2003). Microstructure of Martensite, Why It Forms and How It Gives Rise to the Shape-Memory Effect, Oxford University Press.10.1093/oso/9780198509349.001.0001 ↗
13. Temperature dependence of mechanical damping in Ni-Mn-Ga austenite and non-modulated martensite10.1016/j.scriptamat.2008.05.005 ↗
14. Mechanism of shape memory effect in martensitic alloys: An assessment10.1080/14786435.2011.608735 ↗
15. A statistical mechanics approach describing martensitic phase transformation10.1016/j.mechmat.2011.06.001 ↗
16. The role of phase interface energy in martensitic transformations: A lattice Monte-Carlo simulation10.1016/j.mechrescom.2013.11.006 ↗
17. Fatigue of Nitinol: The State-of-the-Art and Ongoing Challenges10.1016/j.jmbbm.2015.06.010 ↗
18. Thermal expansion and damping characteristics of Y-TZP10.1016/S1359-6462(99)00012-3 ↗
19. Damping capacity of thermoelastic martensite in shape memory alloys10.1016/S0925-8388(03)00268-8 ↗
20. Shape memory effect in nanoindentation of nickel–titanium thin films10.1063/1.1591235 ↗
21. Crystal symmetry and reversibility of martensitic transformation10.1038/nature02378 ↗
22. Size effects on the martensitic phase transformation of NiTi nanograins10.1016/j.jmps.2006.06.006 ↗
23. Kinetics and rates of martensitic phase transformation based on statistical physics10.1016/j.commatsci.2011.03.038 ↗
24. Shape-memory materials and hybrid composites for smart systems: Part I Shape-memory materials10.1023/A:1004692329247 ↗
25. Three-dimensional Landau theory for multivariant stress-induced martensitic phase transformations. I. Austenite ↔ martensite10.1103/PhysRevB.66.134206 ↗
26. Polymer/NiTi-composites: Fundamental Aspects, Processing and Properties10.1002/adem.200500130 ↗
27. Finite element modeling of dynamics of martensitic phase transitions10.1063/1.2955514 ↗
28. Hartl, D.J., and Lagoudas, D.C. (2008). Thermomechanical Characterization of Shape Memory Alloy Materials, Springer.10.1007/978-0-387-47685-8_2 ↗
29. Some unsolved aspects in Nitinol10.1016/j.msea.2006.05.072 ↗
30. Mechanical characterization of NiTi SMA wires using a dynamic mechanical analyzer10.1016/j.msea.2008.04.052 ↗
31. Shape memory materials and hybrid composites for smart systems: Part II Shape-memory hybrid composites10.1023/A:1004674630156 ↗
32. Damping behaviour of shape memory alloys: Strain amplitude, frequency and temperature effects10.1006/jsvi.1998.1578 ↗
33. Dynamic impact behavior of Ni-rich and Ti-rich shape memory alloys10.1016/j.materresbull.2013.04.073 ↗
34. Change in Young’s modulus associated with martensitic transformation in shape memory alloys10.4028/www.scientific.net/MSF.327-328.363 ↗
35. Martensite Modulus Dilemma in Monoclinic NiTi-Theory and Experiments10.1016/j.ijplas.2014.05.005 ↗
36. Comparisons of nanoindentation, 3-point bending, and tension tests for orthodontic wires10.1016/j.ajodo.2009.11.015 ↗
37. Critical overview of Nitinol surfaces and their modifications for medical applications10.1016/j.actbio.2008.01.013 ↗
38. R-Phase transformation phenomena in thermomechanically loaded NiTi polycrystals10.1016/j.mechmat.2005.05.025 ↗
39. A model coupling plasticity and phase transformation with application to dynamic shear deformation of iron10.1016/j.mechmat.2014.04.010 ↗
40. Stress-induced martensitic phase transformation in thin sheets of Nitinol10.1016/j.actamat.2007.02.011 ↗
41. Shape memory alloys: A material and a technology10.1002/1527-2648(200111)3:11<837::AID-ADEM837>3.0.CO;2-0 ↗
42. Thermomechanical aspects of NiTi10.1016/0022-5096(95)00024-D ↗
43. Experimental Thermomechanical Analysis of Elastomers under Uni-and Biaxial Tensile Stress State10.1007/s11340-013-9820-8 ↗
44. Evolution of transformation characteristics with heating/cooling rate in NiTi shape memory alloys10.1016/j.jmatprotec.2007.05.015 ↗
45. A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings10.1016/j.ijplas.2012.04.001 ↗
46. Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys10.1007/BF02644447 ↗
47. Similar nonlinear mechanical responses in hard and soft materials10.1038/nmat3603 ↗
48. De Silva, C.W. (2006). Vibration: Fundamentals and Practice, CRC Press.10.1201/b18521 ↗