journal article·2023-08-03Open access

Chitosan-Based High-Intensity Modification of the Biodegradable Substitutes for Cancellous Bone

Anna Kołakowska, Dorota Kołbuk, Andrzej Chwojnowski, Andrzej Rafalski, Agnieszka Gadomska-Gajadhur

Abstract

An innovative approach to treating bone defects is using synthetic bone substitutes made of biomaterials. The proposed method to obtain polylactide scaffolds using the phase inversion technique with a freeze extraction variant enables the production of substitutes with morphology similar to cancellous bone (pore size 100–400 µm, open porosity 94%). The high absorbability of the implants will enable their use as platelet-rich plasma (PRP) carriers in future medical devices. Surface modification by dipping enabled the deposition of the hydrophilic chitosan (CS) layer, maintaining good bone tissue properties and high absorbability (850% dry weight). Introducing CS increases surface roughness and causes local changes in surface free energy, promoting bone cell adhesion. Through this research, we have developed a new and original method of low-temperature modification of PLA substitutes with chitosan. This method uses non-toxic reagents that do not cause changes in the structure of the PLA matrix. The obtained bone substitutes are characterised by exceptionally high hydrophilicity and morphology similar to spongy bone. In vitro studies were performed to analyse the effect of morphology and chitosan on cellular viability. Substitutes with properties similar to those of cancellous bone and which promote bone cell growth were obtained.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Polymer Surface Interaction Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Chemistry, Warsaw University of Technology, Noakowskiego St. 3, 00-664 Warsaw, Poland

Institute of Fundamental Technological Research Polish Academy of Sciences, Pawińskiego St. 5B, 02-106 Warsaw, Poland

Nalecz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences, Ks. Trojdena St. 4, 02-109 Warsaw, Poland

Radiosterilisation Facility for Medical Supplies and Transplants, Institute Nuclear Chemistry and Technology, Dorodna St. 16, 03-195 Warsaw, Poland

Funding

National Centre for Research and Development

References (44)

Show source-provided references
1. Size Matters: Defining Critical in Bone Defect Size!10.1097/BOT.0000000000000978 ↗
2. Design of Biocomposite Materials for Bone Tissue Regeneration10.1016/j.msec.2015.07.016 ↗
3. Bone Tissue Engineering Techniques, Advances, and Scaffolds for Treatment of Bone Defects10.1016/j.cobme.2020.100248 ↗
4. Kanczler, J.M., Wells, J.A., Gibbs, D.M.R., Marshall, K.M., Tang, D.K.O., and Oreffo, R.O.C. (2020). Principles of Tissue Engineering, Elsevier.
5. Chandra, P.K., Soker, S., and Atala, A. (2020). Principles of Tissue Engineering, INC.
6. Chitosan Based Polymer/Bioglass Composites for Tissue Engineering Applications10.1016/j.msec.2018.12.026 ↗
7. Engineered Three-Dimensional Scaffolds for Enhanced Bone Regeneration in Osteonecrosis10.1016/j.bioactmat.2020.04.008 ↗
8. Biopolymers for Tissue Engineering Applications: A Review10.1016/j.matpr.2020.09.628 ↗
9. The Effect of Mean Pore Size on Cell Attachment, Proliferation and Migration in Collagen-Glycosaminoglycan Scaffolds for Bone Tissue Engineering10.1016/j.biomaterials.2009.09.063 ↗
10. Attia, S., Narberhaus, C., Schaaf, H., Streckbein, P., Pons-kühnemann, J., Schmitt, C., Neukam, F.W., Howaldt, H.P., and Böttger, S. (2020). Long-Term Influence of Platelet-Rich Plasma (Prp) on Dental Implants after Maxillary Augmentation: Retrospective Clinical and Radiological Outcomes of a Randomized Controlled Clinical Trial. J. Clin. Med., 9.10.3390/jcm9020355 ↗
11. Bedell, M.L., Guo, J.L., Xie, V.Y., Navara, A.M., and Mikos, A.G. (2020). Principles of Tissue Engineering, INC.
12. Gadomska-Gajadhur, A., Ruśkowski, P., Synoradzki, L., Trzaskowska, J., Kruk, A., and Budnicka, M. (2018). Sposób Wytwarzania Dynamicznego Substytutu Kości Gąbczastej. (236111), Patent PL.
13. Biocompatibility, Biodegradation and Excretion of Polylactic Acid (PLA) in Medical Implants and Theranostic Systems10.1016/j.cej.2018.01.010 ↗
14. Osteoblast Adhesion on Biomaterials10.1016/S0142-9612(99)00242-2 ↗
15. Surface Functionalization of Chitosan as a Coating Material for Orthopaedic Applications: A Comprehensive Review10.1016/j.carbpol.2020.117487 ↗
16. Budnicka, M., Szymaniak, M., and Gadomska-Gajadhur, A.A. (2018). Wybrane Rozwiązania Technologiczne w Medycynie, Wydawnictwo Naukowe TYGIEL.
17. Chitosan Based Bioactive Materials in Tissue Engineering Applications—A Review10.1016/j.bioactmat.2020.01.012 ↗
18. Halim, A.S., Keong, L.C., Zainol, I., and Rashid, A.H.A. (2012). Chitosan-Based Systems for Biopharmaceuticals, John Wiley & Sons, Ltd.
19. Bone Tissue Engineering: Scaffold Preparation Using Chitosan and Other Biomaterials with Different Design and Fabrication Techniques10.1016/j.ijbiomac.2018.08.056 ↗
20. Challenges in Developing of Chitosan—Based Polyelectrolyte Complexes as a Platform for Mucosal and Skin Drug Delivery10.1016/j.eurpolymj.2020.110020 ↗
21. Biomineralization of Poly-l-Lactide Spongy Bone Scaffolds Obtained by Freeze-Extraction Method10.1002/jbm.b.34441 ↗
22. Zimina, A., Senatov, F., Choudhary, R., Kolesnikov, E., Anisimova, N., Kiselevskiy, M., Orlova, P., Strukova, N., Generalova, M., and Manskikh, V. (2020). Biocompatibility and physico-chemical properties of highly porous PLA/HA scaffolds for bone reconstruction. Polymers, 12.10.3390/polym12122938 ↗
23. The effect of antibacterial particle incorporation on the mechanical properties, biodegradability, and biocompatibility of PLA and PHBV composites10.1002/mame.202000244 ↗
24. Młotek, M., Gadomska-Gajadhur, A., Sobczak, A., Kruk, A., Perron, M., and Krawczyk, K. (2021). Modification of PLA scaffold surface for medical applications. Appl. Sci., 11.10.3390/app11041815 ↗
25. Fabrication of Porous Poly(L-Lactide) (PLLA) Scaffolds for Tissue Engineering Using Liquid-Liquid Phase Separation and Freeze Extraction10.1007/s10856-008-3545-8 ↗
26. Poly-L-Lactide Scaffolds with Super Pores Obtained by Freeze-Extraction Method10.1002/jbm.b.34642 ↗
27. Preparation of Polylactide Scaffolds for Cancellous Bone Regeneration—Preliminary Investigation and Optimization of the Process10.1515/pac-2018-0708 ↗
28. Materiały Porowate Do Regeneracji Tkanki Chrzęstnej i Kostnej
29. Scaffold Development Using Biomaterials: A Review10.1016/j.matpr.2018.02.276 ↗
30. Porosity of 3D Biomaterial Scaffolds and Osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
31. Influence of Platelet-Rich Plasma (PRP) on Osteogenic Differentiation of Rat Bone Marrow Stromal Cells. An in Vitro Study10.1054/ijom.2003.0492 ↗
32. Effects of Polylactide Copolymer Implants and Platelet-Rich Plasma on Bone Regeneration within a Large Calvarial Defect in Sheep
33. A Bioresorbable Polylactide Implant Used in Bone Cyst Filling10.1007/s10856-015-5647-4 ↗
34. Bone Tissue Engineering: State of the Art and Future Trends10.1002/mabi.200400026 ↗
35. Recent Advances in Bone Tissue Engineering Scaffolds10.1016/j.tibtech.2012.07.005 ↗
36. The Use of Contact Angle and the Surface Free Energy as the Surface Characteristics of the Polymers Used in Medicine
37. Surface Modification of Polylactic Acid (PLA) by Air Atmospheric Plasma Treatment10.1016/j.eurpolymj.2014.06.002 ↗
38. Collagen Tissue Treated with Chitosan Solutions in Carbonic Acid for Improved Biological Prosthetic Heart Valves10.1016/j.msec.2014.01.017 ↗
39. Aminolysis as a Surface Functionalization Method of Aliphatic Polyester Nonwovens: Impact on Material Properties and Biological Response10.1039/D2RA00542E ↗
40. Effect of Crystallinity and Related Surface Properties on Gene Expression of Primary Fibroblasts10.1039/D1RA07237D ↗
41. Control of Matrix Stiffness Using Methacrylate-Gelatin Hydrogels for a Macrophage-Mediated Inflammatory Response10.1021/acsbiomaterials.0c00295 ↗
42. Systematic Study of Osteoblast and Fibroblast Response to Roughness by Means of Surface-Morphology Gradients10.1016/j.biomaterials.2007.01.019 ↗
43. Effect of Microporosity on Scaffolds for Bone Tissue Engineering10.1093/rb/rby001 ↗
44. Influence of Pore Sizes in 3D-Scaffolds on Mechanical Properties of Scaffolds and Survival, Distribution, and Proliferation of Human Chondrocytes10.1080/15376494.2021.1943077 ↗