journal article·2023-01-26Open access

Differences between the Fittings of Dental Prostheses Produced by CAD-CAM and Laser Sintering Processes

Mariano Herrero-Climent, Miquel Punset, Meritxell Molmeneu, Aritza Brizuela, Javier Gil

Abstract

Digital dentistry and new techniques for the dental protheses’ suprastructure fabrication have undergone a great evolution in recent years, revolutionizing the quality of dental prostheses. The aim of this work is to determine whether the best horizontal marginal fit is provided by the CAD-CAM technique or by laser sintering. These values have been compared with the traditional casting technique. A total of 30 CAD-CAM models, 30 laser sintering models, and 10 casting models (as control) were fabricated. The structures realized with chromium–cobalt (CrCo) have been made by six different companies, always with the same model. Scanning electron microscopy with a high-precision image analysis system was used, and 10,000 measurements were taken for each model on the gingival (external) and palatal (internal) side. Thus, a total of 1,400,000 images were measured. It was determined that the CAD-CAM technique is the one that allows the best adjustments in the manufacturing methods studied. The laser sintering technique presents less adjustment, showing the presence of porosities and volume contraction defects due to solidification processes and heterogeneities in the chemical composition (coring). The technique with the worst adjustments is the casting technique, containing numerous defects in the suprastructure. The statistical analysis of results reflected the presence of statistically significant gap differences between the three manufacturing methods analyzed (p < 0.05), with the samples manufactured by CAD-CAM and by traditional casting processes being the ones that showed lower and higher values, respectively. No statistically significant differences in fit were observed between the palatal and gingival fit values, regardless of the manufacturing method used. No statistically significant differences in adjustment between the different manufacturing centers were found, regardless of the process used.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Porto Dental Institute, Av. de Montevideu 810, 4150-518 Porto, Portugal

Biomaterials, Biomechanics and Tissue Engineering Group (BBT), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya (UPC), Av. Edurad Maristany 16, 08019 Barcelona, Spain

Barcelona Research Centre in Multiscale Science and Engineering, Technical University of Catalonia (UPC), Av. Eduard Maristany, 10-14, 08019 Barcelona, Spain

Facultad de Odontología, Universidad Europea Miguel de Cervantes, C/del Padre Julio Chevalier 2., 47012 Valladolid, Spain

Bioengineering Institute of Technology, Faculty of Medicine and Health Sciences, International University of Catalonia, Josep Trueta s/n, 08195 Barcelona, Spain

Funding

Spanish government · Ministry of Science and Innovation of Spain

References (43)

Show source-provided references
1. Evaluation of the marginal fit of three margin designs of resin composite crowns using CAD/CAM10.1016/j.jdent.2006.04.008 ↗
2. Mangano, F., Gandolfi, A., Luongo, G., and Logozzo, S. (2017). Intraoral scanners in dentistry: A review of the current literature. BMC Oral Health, 17.10.1186/s12903-017-0442-x ↗
3. Understanding dental CAD-CAM for restorations—The digital workflow from a mechanical engineering viewpoint
4. CEREC CAD-CAM Chairside System
5. Padrós, R., Giner, L., Herrero-Climent, M., Falcao-Costa, C., Ríos-Santos, J.-V., and Gil, F.J. (2020). Influence of the CAD-CAM systems on the marginal accuracy and mechanical properties of dental restorations. Int. J. Environ. Res. Public Health, 17.10.3390/ijerph17124276 ↗
6. Passivity of fit of CAD/CAM and copy-milled frameworks, veneered frameworks, and anatomically contoured, zirconia ceramic, implant-supported fixed prostheses10.1016/S0022-3913(12)60067-5 ↗
7. The role of welding techniques in the biomechanical behavior of implant-supported prostheses10.1016/j.msec.2017.04.090 ↗
8. Khan, A.A., Fareed, M.A., Alshehri, A.H., Aldegheishem, A., Alharthi, R., Saadaldin, S.A., and Zafar, M.S. (2022). Mechanical properties of the modified denture base materials and polymerization methods: A systematic review. Int. J. Mol. Sci., 23.10.3390/ijms23105737 ↗
9. Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques10.1016/j.prosdent.2006.05.013 ↗
10. Titanium alloys for dental implants: A review10.3390/prosthesis2020011 ↗
11. Influence of Material Selection on the Marginal Accuracy of CAD-CAM-Fabricated Metal- and All-Ceramic Single Crown Copings
12. Dental wings CAD-CAM system precision: An internal and marginal fit experimental analysis
13. An in vitro comparison of vertical marginal gaps of CAD-CAM titanium and conventional cast restorations10.1111/j.1532-849X.2008.00302.x ↗
14. CAD-CAM for dental restorations—Some of the curious challenges10.1109/10.133223 ↗
15. CAD/CAM complete denture systems and physical properties: A review of the literature10.1111/jopr.13243 ↗
16. Laser sintering of unimodal distributed glass powders of different size10.1016/j.proeng.2015.01.180 ↗
17. Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs10.1002/jor.23075 ↗
18. Electrochemical corrosion studieson Co-Cr-Mo implant alloy in biological solutions10.1016/j.matchemphys.2005.04.007 ↗
19. Lozano, P., Peña, M., Herrero-Climent, M., Rios-Santos, J.V., Rios-Carrasco, B., Brizuela, A., and Gil, J. (2022). Corrosion behavior of titanium dental implants with implantoplasty. Materials, 15.10.3390/ma15041563 ↗
20. Effect of the environment on wear ranking and corrosion of biomedical CoCrMo alloys
21. Rahmitasari, F., Ishida, Y., Kurahashi, K., Matsuda, T., Watanabe, M., and Ichikawa, T. (2017). PEEK with reinforced materials and modifications for dental implant applications. Dent. J., 5.10.3390/dj5040035 ↗
22. Vichi, A., Zhao, Z., Paolone, G., Scotti, N., Mutahar, M., Goracci, C., and Louca, C. (2022). Factory crystallized silicates for monolithic metal-free restorations: A flexural strength and translucency comparison test. Materials, 15.10.3390/ma15217834 ↗
23. Accuracy and practicality of intraoral scanner in dentistry: A literature review10.1016/j.jpor.2019.07.010 ↗
24. The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks10.1016/j.jdent.2007.07.013 ↗
25. In vitro vertical misfit evaluation of cast frameworks for cement-retained implant-supported partial prostheses
26. Co-sintering and microstructural characterization of steel/cobalt base alloy biomaterials10.1007/s10853-011-5976-8 ↗
27. Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: Two- and three-dimensional replica techniques10.4047/jap.2013.5.2.179 ↗
28. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications10.1016/j.jmbbm.2013.01.021 ↗
29. Selective laser melting technique of Co-Cr dental alloys: A review of structure and properties and comparative analysis with other available techniques10.1111/jopr.12268 ↗
30. Fabrication of dental implants by the additive manufacturing method: A systematic review10.1016/j.prosdent.2019.01.018 ↗
31. Computer-designed selective laser sintering surgical guide and immediate loading dental implants with definitive prosthesis in edentulous patient: A preliminary method10.4103/1305-7456.126257 ↗
32. Padrós, R., Punset, M., Molmeneu, M., Velasco, A.B., Herrero-Climent, M., Rupérez, E., and Gil, F.J. (2020). Mechanical Properties of CoCr Dental-Prosthesis Restorations Made by Three Manufacturing Processes. Influence of the Microstructure and Topography. Metals, 10.10.3390/met10060788 ↗
33. Velasco-Ortega, E., Flichy-Fernández, A., Punset, M., Jiménez-Guerra, A., Manero, J.M., and Gil, F.J. (2019). Fracture and fatigue of titanium narrow dental implants: New trends in order to improve the mechanical response. Materials, 12.10.3390/ma12223728 ↗
34. Pérez, R.A., Gargallo, J., Altuna, P., Herrero-Climent, M., and Gil, F.J. (2020). Fatigue of narrow dental implants: Influence of the Hardening method. Materials, 13.10.3390/ma13061429 ↗
35. Titanium corrosion mechanisms in the oral environment: A retrieval study10.3390/ma6115258 ↗
36. Comparison of accuracy and reproducibility of casts made by digital and conventional methods10.1016/j.prosdent.2014.09.027 ↗
37. Accuracy and reliability of methods to measure marginal adaptation of crowns and FDPs: A literature review10.1111/jopr.12006 ↗
38. Ductility and structure of some cobalt-base dental casting alloys10.1016/0142-9612(84)90016-4 ↗
39. Corrosion behaviour and surface analysis of a Co–Cr and two Ni–Cr dental alloys before and after simulated porcelainfiring10.1111/j.1600-0722.2011.00791.x ↗
40. Gašpár, Š., Majerník, J., and Kolínský, J. (2021). Analysis of Causes of Porosity Change of Castings under the Influence of Variable Biscuit Height in the Filling Chamber. Materials, 14.10.3390/ma14226827 ↗
41. A scanning electron microscope study of Co-Cr partial dentures fractured in service10.1016/0300-5712(84)90045-9 ↗
42. Toledano-Serrabona, J., Sánchez-Garcés, M.A., Gay-Escoda, C., Valmaseda-Castellon, E., Camps-Font, O., Verdeguer, P., Molmeneu, M., and Gil, F.J. (2021). Mechanical properties and corrosión behavior of Ti6Al4V particles obtained by Implatoplasty. An in vivo study. Part II. Materials, 14.10.3390/ma14216519 ↗
43. External gap progression after cyclic fatigue of adhesive overlays and crowns made with high translucency zirconia or lithium silicate10.1111/jerd.12837 ↗